Using Radio Kill; Using Remote Kill - Motorola APX 7000XE User Manual

Press the Menu Select button directly below Send to initiate
command.
6
If the receiving radio does not have encryption key to
decrypt the received the command, your radio display
shows Ack received.
OR
If the receiving radio does not encryption key to decrypt the
received encrypted command, your radio display shows
Decrypt failed.
OR
If the receiving radio is powered off, your radio display
shows No Acknowledgement.
Once the receiving radio received the command, its screen
locked and request for password. To un-stun a radio, follow the
procedure in Unlocking Your Radio on page 101.


Using Radio Kill

This feature allows you to render your radio or another radio
inoperable if the radio is misplaced or lost. When a radio is
killed, the display turns blank and all functions of the radio are
not usable.
The killed radio can only be recovered from KILL with a special
device. Consult an authorised and qualified technician for
details.
104
English


Using Remote Kill

Remote Kill allows you to render another radio inoperable by
sending an over the air command using the menu on your radio.
1 < >
or to Kill.
2
Press the Menu Select button directly below Kill. The
display shows Enter Password.
3
Use the keypad to enter your Tactical Inhibit Encode
Password.
4
Press the Menu Select button directly below Ok. The display
shows radio Contact IDs.
5 U D
or to the required ID.
OR
Press the Menu Select button directly below LNum to go to
the last number dialed.
OR
Use the keypad to enter the required ID.
OR
Press the Menu Select button directly below Send to initiate
command.