Table of Contents
Advertisement
HOTT
1, VOINCNAL
VOOURIF
I NAY
Viewfinder fitting and lock ring
FILTER selector
Lens mount clamp ring
[2] VTR button
[3] AUTO W/B BAL switch
[4] UP/ON button and DOWN/OFF button
Screw hole for tripod (U4/4" -20UNC)
. Screw hole for tripod (U%/s" —16UNC)
[5] GAIN selector
(6] BARSWB selector
POWER switch
[1] FILTER selector
Select the appropriate filter as indicated below.
1
3200K
todine lamp, sunrise or sunset
5600K + 1/e ND *
Bright outdoor
5600K
Cloudy or rainy
* ND: Neutral density filter
[2] VTR button
When the camera is connected to a portable VTR, press
this button to start recording. To stop recording, press the
button again. If the camera is connected to a
CCU-M3/M3P camera control unit, the return video
pictures can be monitored on the viewfinder screen while
the button is kept depressed. When the button is
released, the camera pictures can be monitored.
Grip
Used when carring the video camera.
If necessary, the grip can be detached from the video camera.
[8] SC PHASE selector
SC PHASE control
H PHASE control
SHUTTER switch
SHUTTER SPEED
selector
ABL switch
ZEBRA switch
115] DISP CHG switch
REC REVIEW button
[3] AUTO WIB BAL (automatic white/black balance
adjustment) switch
When the BARSWB selector [6]is set to AUTO, white
balance and black balance can be automatically adjusted
with this switch. Black balance can also be adjusted
automatically with this switch when the BARS/WB
selector is set to 3200K.
WHT: For automatic white balance adjustment, push this
switch to WHT. The adjusted value will be
automatically stored in the memory.
BLK: For automatic black balance and black set level
adjustment, push this switch to BLK. The adjusted
value will be automatically stored in the memory.
This switch automatically returns to the center position
when it is released.
DXC - 325 (UC)
DXC -325P (EK)
Advertisement
Table of Contents
