Basic Functions; Switching On And Off/Standby; Adjusting Volume And Sound - Philips AZ 1508 Instructions For Use Manual

BASIC FUNCTIONS
Switching on and off/standby
Push the POWER button.
-► The display lights up. If the set runs from batteries the
display will not be back-lit.
The set is switched off when the POWER button is released.
In order to switch off the power supply, remove the mains plug.
Note: If you run the set from batteries
,
always be sure to switch the set off after use. This will avoid
unnecessary power consumption.
Adjusting volume and sound
Adjust the volume using the controls VOLUME
Y ▲.
-► Display indication: Volume level from 0 to 32.
Adjust the sound to suit your taste by pressing the button DSC
several times (DBB is Dynamic Bass Boost).
-►A light indicates either DBB-JAZZ-POP.
Create a phenomenal surround sound effect by pressing
INCREDIBLE SURROUND.
-►The INCREDIBLE SURROUND button lights up.
Do not cover any vents and leave sufficient room around the unit
for ventilation.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
8