Playing A Disc - Continuous Play - Sony CDP-C910 Operating Instructions Manual

Playing a Disc - Continuous Play
PHONE LEVEL
Disc magazine
= CONTINUE
s O®DOOODDO®O
The "- WELCOME ! -" display only appears after
loading a magazine.
Choose whether to play one disc (1 DISC) or all
discs (ALL DISCS).
a CONTINUE
ots DODOOOE
442] aunnaa
" ^ A gaaaadg
è
Music calendar
0000000000
bec TRACK om sec
When all selections of a disc are played, the circle on
the tray number goes off.
Before playing a disc, turn on the amplifier and set the
input selector to the CD player position.
To stop play
To stop for a moment during play, press I.
Press » or Ill to resume play.
To stop play, press Bl.
To stop play and remove the disc magazine, press &
EJECT.
Caution on adjusting volume
Do not turn up the volume while listening to a portion
with very low level inputs or no audio signals. If you do,
the speakers may be damaged when a peak level
portion is played.
To listen with the headphones
Connect the headphones and control the volume with
PHONE LEVEL/LINE OUT LEVEL control or LINE OUT
LEVEL buttons on the remote commander.
Notes
* Disc memo (see page 22) appears in the display window during
the stop mode. If the disc memo is not stored, the disc
number - such as ''XDISC-19*", is displayed.
* When a magazine is loaded, all slot numbers will be displayed
until that slot is recognized as empty. Empty slots are
recognized when is pressed. The corresponding numbers will
disappear.
* "- NO DISC -" is displayed when the magazine is not loaded in
the unit, or when the magazine is empty.
You can change the "- NO DISC -" display. See page 22 for
procedure.
* The play mode in use before turning the power off is retained in
memory.
About the "- SEE YOU |-" display
The "- SEE YOU ! -" display only appears after ejecting the
magazine. A few seconds later, the display will change to "- NO
DISC -".