Table of Contents
Advertisement
General Description > Inserting Disc
2-8 Inserting Disc
(1) Inserting disc to DVD video camera/recorder
1
Pr ess down the DISC EJECT button once and
r elease it .
A few moments after the ACCESS/ PC indicator
blinks, the cover of disc insertion block will open
slightly.
2
Gently open the cover by hand until it stops.
3
Inser t the disc, in Round DVD Holder, into the
disc guide until it stops.
Note that the recording/playback sur face of
disc must face the inside of DVD video camera/
recorder. The orientation for inserting the disc
into the disc guide is also predetermined: Load
the disc correctly, referring to the figure .
4
Push the section ma rked " PUSH CLOSE" on
t he cov er of disc inser tion block, to close the
co ver .
5
Turn t he DVD video camera /r ecorder on
(
VI DEO or
PHOTO).
When "DISC ACCESS" disappears, the DVD
video camera/recorder is ready for recording.
Identifying recording/playback
sides of disc :
Single sided disc:
The recording/playback side
is opposite to the printed label.
Double -sided disc :
The recording/playback side
of " SIDE A" is opposite to the
"SIDE A" marked side.
The recording/playback side
of "SIDE B" is the " SIDE A"
marked side.
(2) Removing disc from round DVD holder
1
Hold the Round DVD Holder with SIDE A facing up. While pushing the two release levers in the direction of arrows (1)
mar ked on holder, slowly open SIDE A of the holder in the direction of arrows (2), taking care not to drop the disc.
2
Without touching the recording/playback sur face, hold the disc edge and center hole to remove it.
Release
levers
1
1
SIDE A mark
PUSH CLOSE
portion
"SIDE A" mark
The opposite side is
the "SIDE A"
recording/playback
side.
Do not open
2
more than 90˚.
2
2 - 12
DISC EJECT
button
Disc cover
Correct
orientation
Incorrect orientation
Disc
guide
Incorrect
orientation
Advertisement
Table of Contents
