Identification Of Controls - Yamaha DSP-E200 Owner's Manual

NATURAL SOUND DIGITAL SOUND FIELD PROCESSOR
POWER
1
10

IDENTIFICATION OF CONTROLS

NORMAL
DELAY ms
WIDE
TEST
F C R
PHANTOM
PRO LOGIC CONCERT MONO ROCK CONCERT
ENHANCED VIDEO MOVIE CONCERT HALL
2
1
POWER
Turns the power on/off.
2
Display panel
Displays your selection on the DSP or
other informations.
3
TAPE MONITOR
Used when you have connected the
tape deck to this unit's TAPE terminals
to select that tape as the source. (See
page 14.)
4
TEST
Used for speaker balance adjustment.
(See pages 11–12.)
5
CENTER MODE
Selects center speaker mode. (See
page 11.)
6
DIGITAL SOUND FIELD
PROCESSING programs
Selects a program from the digital
sound field processor. (See pages
13–15.)
7
MASTER VOLUME
Turns the master volume level up/down.
DSP–E200
TAPE
MONITOR
DIGITAL SOUND FIELD PROCESSING
CENTER
PRO LOGIC ENHANCED
TEST MODE
DOLBY SUR.
3 4 5
DOLBY SURROUND
P R O • L O G I C
CONCERT MONO ROCK CONCERT
OFF
VIDEO MOVIE CONCERT HALL
6
8
EFFECT ON/OFF
Switches on/off the digital sound field
processor. (See pages 13–15.)
9
DELAY TIME
Adjusts delay time. (See page 15.)
0
FRONT EFFECT LEVEL
Adjusts effect sound output level at
front speakers. (See page 16.)
A
CENTER LEVEL
Adjusts center speaker sound output
level. (See page 16.)
B
REAR LEVEL
Adjusts rear speaker sound output
level. (See page 16.)
C
MUTING
When pressed, mutes the volume level.
To resume original volume level, press
this again.
While muting, the indicator on the
VOLUME control flashes on and off
continuously.
VOLUME
–dB
7