AEG L6FLG49WC User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L6FLG49WC
  6. User manual
AEG L6FLG49WC User Manual

AEG L6FLG49WC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L6FLG49WC
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L6FLG49WC

Summary of Contents for AEG L6FLG49WC

  • Page 1 L6FLG49WC User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............38 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. The appliance maximum load is 9 kg. Do not exceed • the maximum load of each programme (refer to the “Programmes”...
  • Page 5 ENGLISH • Do not install or use the appliance • Do not touch the mains cable or the where the temperature can be less mains plug with wet hands. than 0°C or where it is exposed to the • Do not pull the mains cable to weather.

  • Page 6: Product Description

    • Do not touch the glass door while a are only available to professional programme operates. The glass can repairers, and that not all spare parts get hot. are relevant for all models. • Make sure that all metal objects are •...

  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).

  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 4. Remove the three bolts by using the key supplied with the appliance. Pull out the plastic spacers. We recommend that you keep the packaging and The appliance must be level and stable. the transit bolts for any transport of the appliance. A correct adjustment of the appliance level prevents the 5.
  • Page 10 You can extend the drain hose to maximum 400 cm. Contact the authorized 45º 45º service centre for the other 20º 20º drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
  • Page 11 ENGLISH 6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 5.5 Electrical connection The end of the drain hose must always be ventilated , At the end of installation you can connect i.e.

  • Page 12: Accessories

    If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put the tumble dryer AEG, secure the appliance in the fixing under the washing machine. plates. Verify the compatible stacking kit by checking the Read carefully the instructions supplied depth of your appliances.
  • Page 13 ENGLISH Programme dial • Skvrny option Display • Předpírka option Odložený start touch button Antialergický touch button Úspora času touch button Jemné+ touch button Odstřeďování reduction touch button Máchání skipping touch button • Extra máchání option • Pouze máchání option Teplota touch button Start/Pauza touch button Zap./Vyp.

  • Page 14: Dial And Buttons

    Spinning and draining phase indicator. It flashes during spin and drain phase. Child safety lock indicator. Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. No spin speed indicator. Spin phase is off. Rinse hold indicator.
  • Page 15 ENGLISH turns regularly to reduce creasing. • Předpírka You must drain the water to unlock Use this option to add a pre-wash the door. phase at 30 °C before the washing If you touch the Start/Pauza button, phase. the appliance performs the spinning This option is recommended for phase and drains the water.

  • Page 16: Programmes

    This option ensures also a proper This option increases slightly reduction of pollens/allergenic items. the programme duration. Tested for Staphylococcus aureus, Enterococcus 8.10 Odložený start faecium, Candida albicans, With this option you can delay the start of Pseudomonas aeruginosa a programme in a more convenient time.
  • Page 17 ENGLISH Programme Programme description Machine washable wool, hand washable wool and other Vlna/Hedvábí fabrics with «hand washing» care symbol Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Synthetic sport items. This programme is designed to gently wash modern outdoor sporting garments and is also suitable for sporting clothes such as gym, cycling or jogging and simi‐...
  • Page 18 Programme temperature, maximum spin speed and maximum load Default tempera‐ Maximum load Reference spin ture Programme speed Temperature Spin speed range range Eco 40-60 1400 rpm 9 kg 40 °C 1400 rpm - 400 rpm 40 °C 1400 rpm...
  • Page 19 ENGLISH Programme options compatibility OPTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Odstřeďování ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Skvrny ■ ■ ■ ■ Předpírka ■ ■ ■...

  • Page 20: Settings

    Universal Liquid Uni‐ Liquid for Delicates Programme Special versal coloureds woollens powder Vlna/Hedvábí ▲ ▲ ▲ ▲ Outdoor ▲ ▲ 20 min. - 3 kg ▲ ▲ Přikrývka Snadné žehlení ▲ ▲ ▲ 1) At temperature higher than 60 °C the use of powder detergent is recommended.

  • Page 21: Before First Use

    ENGLISH • To activate/deactivate this option The display shows above the touch the Teplota button and the Odstřeďování button simultaneously until relevant indicator comes on/ goes off . 11. BEFORE FIRST USE 1. Make sure that all transit bolts have 4.
  • Page 22 12.3 Filling the detergent and additives 2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch).
  • Page 23 ENGLISH The PROSENSE estimation starts at the end of the countdown. Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Start/Pauza button to pause the appliance. The related indicator flashes. 2. Touch the Odložený start button Make sure that the flap does not cause a blockage when you close the drawer.
  • Page 24 12.9 Programme phase ProSense starts the laundry load detection: indicators 1. The appliance detects the load in the When the programme starts the indicator first 30 seconds: the indicator of the running phase flashes and the the time dots flash, the drum rotates other phase indicators are steady on.
  • Page 25 ENGLISH 12.12 Opening the door - 1. Press the Zap./Vyp. button to deactivate the appliance. Adding garments After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. While a programme or the delay start operates, the appliance door is locked.

  • Page 26: Hints And Tips

    4. Press the Zap./Vyp. button a few • After 5 minutes from the end of the seconds to deactivate the appliance. washing programme Press the Zap./Vyp. button to activate In any case, the appliance the appliance again. empties the water out...
  • Page 27 ENGLISH 13.2 Stubborn stains • unsatisfactory washing results, • the wash load to turn grey, For some stains, water and detergent is • greasy clothes, not sufficient. • mould in the appliance. We recommend that you pre-treat these Excessive detergent may cause: stains before you put the items in the •...

  • Page 28: Care And Cleaning

    14. CARE AND CLEANING the drain pump' and 'Cleaning the inlet WARNING! hose and the valve filter' paragraphs. If Refer to Safety chapters. necessary, please contact the Authorised Service Centre. 14.1 Periodic cleaning 14.3 External cleaning schedule Clean the appliance with mild soap and Periodic cleaning helps to extend the warm water only.
  • Page 29 ENGLISH detergent into empty drum, in order to and/or formation of mould in the rinse out any left residues. detergent dispenser drawer, once in a while carry out the following cleaning 14.6 Door seal procedure: 1. Open the drawer. Press the catch This appliance is designed with a self downwards as indicated in the cleaning draining system, allowing light...
  • Page 30 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 2. Place a suitable bowl below the drain pump access to collect the water that flows out.
  • Page 31 ENGLISH 8. If it is necessary, remove fluff and 12. Close the pump cover. objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 14.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the...

  • Page 32: Troubleshooting

    14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0°...
  • Page 33 ENGLISH 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/Pauza button may flash continuously: Problem Possible solution...
  • Page 34 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...

  • Page 35: Consumption Values

    ENGLISH Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature. •...
  • Page 36 Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.

  • Page 37: Quick Guide

    ENGLISH Programme Litres h:mm °C Jemné prádlo 0.35 1:25 1200 30°C Vlna/Hedvábí 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry.

  • Page 38: Environmental Concerns

    Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description White and coloured cottons. Normally soiled Eco 40-60 9 kg garments. 9 kg White cotton and coloured cotton. Bavlna 4 kg Synthetic items or mixed fabric items.
  • Page 40 www.aeg.com/shop...

Table of Contents