Controls; Control Locations; Motion Control Levers - Husqvarna EZ4624 Operator's Manual

Controls

This operator's manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with either a Briggs &
Stratton or Kohler four-stroke overhead valve engine
developing 20 - 24 horse power.
Transmission from the engine is made via two belt-
driven hydraulic pumps, which in turn drive a hydraulic
motor for each drive wheel. Using the left and right
steering controls, the flow is regulated and thereby the
direction and speed.

Control Locations

1. Parking brake .................................................... 17
2. Motion control levers ......................................... 16
3. Fuel shut off valve ............................................. 18
4. Seat adjustment bolts ........................................ 18
5. Fuel tank cap ..................................................... 19
6. By pass linkage ................................................. 19
18
-
English
CONTROLS
Zero Turn Rider
Page
7. Fuses ................................................................ 20
8. Hour meter ........................................................ 21
9. Choke control .................................................... 21
10. Ignition switch .................................................... 21
11. Throttle control .................................................. 22
12. Blade switch ...................................................... 22
13. Cutting height pedal .......................................... 23
8011-769-2
Page