• Built-in USB-C input cable is compatible with power adapters up to 9V 2A • Magnetic charging pad secures device in place while charging • Supports over-current, over-voltage and over- temperature protection • Plug-and-play, no software or drivers required Package Contents • U280M-005-10-BK • Quick Start Guide...
General Safety Instructions • Only connect the charging pad to power adapters that do not exceed 9V 2A. • Make sure to unplug the charging pad from its power source when charging has completed. • Do not place the charging pad near heat sources or open flames.
Operation 1. Connect the charging pad’s built-in USB-C connector to a USB-C power adapter, such as Tripp Lite’s U280-W01-20C1-G (sold separately). Connect the charging pad’s built-in USB-C connector to an available USB-C port on a laptop or computer that is being powered by an external power source.
Visit Tripplite.Eaton.com/warranty today to register your new product. You’ll be automatically entered into a drawing for a chance to win a FREE Eaton Tripp Lite series product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance FCC Warning This device complies with Part 18 and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 8
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.