Related Manuals for ViewSonic PJ-WPD-700
Summary of Contents for ViewSonic PJ-WPD-700
- Page 1 PJ-WPD-700 How to Pair the Transmitter How to Update the Device Firmware Model No. VS19836 P/N: PJ-WPD-700...
- Page 2 Pairing the Transmitter to the Receiver While it is not necessary to pair the Transmitter and Receiver out of the box, they can be re-paired if there are any connection issues. Additionally, up to eight (8) Transmitters can be paired with one Receiver. HDMI USB A (5V/0.5A)
- Page 3 4. Connect the Transmitter’s USB C Input to a USB C port of the casting device (e.g., laptop, mobile phone, tablet). USB C 5. While the projected image displays, “Ready to Pair”, press and hold the Pair Button on the Transmitter for five seconds. Once paired, casting will start automatically.
-
Page 4: Device Updates
Device Updates HDMI USB A (5V/0.5A) 1. Connect the Receiver’s HDMI Output to an HDMI port of the projector. NOTE: Ensure the projector is also turned ON. 2. Plug the Receiver’s USB A Input into the USB A port of the projector that can provide 5V/0.5A power. - Page 5 7. Enter the settings page, turn on internet settings, and connect the Receiver to the network. 8. Check the icons at the top right of the projected image and verify that the Receiver is connected to the Internet network. 9. After connecting the Receiver to the network, return to the settings page and select “Upgrade”.