GE DISPOSALL GFC365 Owner's Manual And Installation Instructions page 11

CONNECT PLUMBING
lines up with the outlet drain pipe.
Outlet
2. Securely connect all plumbing, including the drain
pipe and the dishwasher drain (if used), observing all
codes and ordinances.
49-4000291 Rev 0
Installation Instructions
Sink
Rotate the disposer
as needed to align
with the drain pipe
Sink
Secure all plumbing
connections
Outlet
IF CONNECTING TO A DISHWASHER
• Connect the flexible drain hose to the dishwasher
discharge using a hose clamp. If the hose size is
different, you will need a stepped rubber adapter.
Hose Clamp
See the Installation Instructions that came with your
dishwasher for details.
INSTALL SPLASH GUARD AND
STOPPER
•
Insert the stopper over the splash guard.
NOTE: Both the splash guard and stopper may be
removed and cleaned as needed.
CONNECT POWER AND TEST FOR
LEAKS
• lug the disposer into an outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
• Run water to check the disposer for leaks 24 hours
after installation and first operation.
• Keep and refer to this Owner's Manual for proper use
and care of this disposer.
Stepped Rubber Adapter
Hose
Clamp
connection
Stopper
Splash
Guard
Sink
11