Removing And Inserting The Brew Group; Cleaning And Maintenance - Philips LatteGo 4400 Series User Manual

1 Tap the Settings
2 Use the up and down icons to select 'Factory settings'. Confirm by tapping the OK icon.
3 Press the start/stop
-
The settings are now being restored.
The following factory settings are restored to default: water hardness, standby time, brightness, display
backlight, start-up rinsing, sound, temperature, front illumination, profiles.

Removing and inserting the brew group

Go to www.philips.com/coffee-care for detailed video instructions on how to remove, insert and clean the
brew group.
Removing the brew group from the machine
1 Switch off the machine.
2 Remove the water tank and open the service door (Fig. 21).
3 Press the PUSH handle (Fig. 22) and pull at the grip of the brew group to remove it from the machine
(Fig. 23).
Reinserting the brew group
Before you slide the brew group back into the machine, make sure it is in the correct position.
1 Check if the brew group is in the correct position. The arrow on the yellow cylinder on the side of the
brew group has to be aligned with the black arrow and N (Fig. 24).
-
If they are not aligned, push down the lever until it is in contact with the base of the brew group (Fig.
25).
2 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 26) until it locks into
position with a click (Fig. 27). Do not press the PUSH button.
3 Close the service door and place back the water tank.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting coffee
for a long time with a steady coffee flow.
Consult the table below for a detailed description on when and how to clean all detachable parts of the
machine. You can find more detailed information and video instructions on www.philips.com/coffee-care.
See figure B for an overview of which parts can be cleaned in the dishwasher.
Detachable parts
Brew group
icon.
button to confirm you want to restore the settings.
When to clean
Weekly
Monthly
How to clean
Remove the brew group from the machine (see
'Removing and inserting the brew group').
Rinse it under the tap (see 'Cleaning the brew
group under the tap').
Clean the brew group with the Philips coffee
oil remover tablet (see 'Cleaning the brew
group with the coffee oil remover tablets').
English
11