Table of Contents
Advertisement
2022/04/12 21:41:16 (GMT+09:00)
APPENDIX
Withdrawal of 41P/51P FFC using Non-ZIF (IPEX connector)
Initial condition
Withdrawal of 41P/51P FFC using Non-ZIF (Molex connector)
Initial condition
TOOLS & EQUIPMENTS
Step 1
Step 1 & 2
2
PULL
FFC PRECAUTIONS
SECTION 1
Step 2
PRESS
1
PRESS
1
PULL
Caution
1
PUSH
1
PUSH
SECTION 2
FFC REPLACEMENT CAUTIONS
1
Press the release lock button downward
1
at same time (highlighted in red).
2
1
Pull FFC in straight direction while
pressing
2
both release lock button at the same time.
Note: FFC as in image is only for
reference purpose. Actual FFC outlook
may vary by each vendor.
Push the side-release lock buttons inward
1
(highlighted in red).
Pull-out FFC in straight direction while
2
pushing side-release lock buttons at the
same time.
Note: FFC as in image is only for reference
purpose. Actual FFC outlook may vary by
each vendor.
Ensure fingers does NOT touch
parts on board and tuner connector
when pushing the side locks.
SECTION 3
SMART CORE
67
APPENDIX
SYS SET
Advertisement
Table of Contents
