2023/12/21 05:01:59 (GMT+09:00)
SECTION 4: XR-85X9*K
INFORMATION
WIRE DRESSING
TOOLS & EQUIPMENTS
FFC PRECAUTIONS
Caution:
1. Operator need to fix Smart Core on FLAT surface before FFC insertion to ensure FFC STRAIGHT insertion.
2. FFC side with blue supporting tape, must face CONNECTOR WITH LOCKING during FFC insertion.
FFC (longer side) is inserted at Main Board
FFC (shorter side) is inserted at Smart Core
SECTION 1
After assemble Receiver board to Smart Core, operator
need to insert Receiver board FFC in straight condition.
FFC side with blue supporting tape face
connector with locking during insertion.
Smart Core is placed on FLAT surface during FFC insertion.
SECTION 2
SECTION 3
4-3. WIRE DRESSING
SECTION 4
SMART CORE
66
APPENDIX
SYS SET