Cisco 2600 Series Installing page 12

Installing the Grounding Lug on a Cisco 3660 Router
Figure 17
Connect the other end of the grounding lug wire to a grounding point at your site.
Step 5
NEBS/ETSI Intrabuilding Lightning Requirement
Caution
This equipment is suitable for connection to intrabuilding or nonexposed wiring or cabling
only. This cabling must be shielded.
Turn ON power to the router.
Step 6
The following warning applies to routers that use a DC power supply:
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch
handle and reinstate power by moving the handle of the circuit breaker to the ON
position.
Installing the Grounding Lug on Cisco 2600 Series and Cisco 3600 Series Routers
12
Grounding Lug Fastened to Cisco 3660 Chassis
VOICE
2V
VIC
FXS
V1
1
SEE MANUAL BEFORE INSTALLA
0
TION
SERIAL
4T
SERIA L 3
SERIA L 2
SERIA L 1
SERIA L 0
CN/LP RXC
RXD TXC TXD
CN/LP RXC
RXD TXC TXD
CN/LP RXC
RXD TXC TXD
CN/LP RXC
RXD TXC
Ground lug
HIGH SPEED SERIAL
1HSSI
V0
HS
EN
ETHERNE T
4E
ETH 3
ETH 2 ETH 1
ETH 0
3
2 1 0
LINK
EN
ACT
TXD
78-11640-01