Connecting Pdp And Speakers - Samsung PS42P2SBX/XEC Service Manual

9-2-5 Connecting Speakers

Connecting PDP and Speakers

Fix the bracket onto the guide pole
located on the rear of speaker and
fasten the screws.
After removing the three screws on
the PDP, clamp the speaker and the
PDP together and fasten the screws.
Connecting Stand and Speakers
When moving your PDP, do NOT hold
the speaker connected to your PDP.
Speaker and your PDP together and
result in a drop of your PDP and a risk
of personal damage and injury.
Connect the speaker audio cable to the external speaker output
jack on the rear of the Media Station matching the + and - ends
of the cable with the diagram on the Media Station.
The speakers MUST have more than 15watts rating(impedance 8Ω ).
The ferrite cores are used to attenuate undesired signals. When you connect the speaker wire to the
EXTERNAL SPEAKER OUT(8Ω) connector, bind the speaker wire round the ferrite core to secure it.
Samsung Electronics
Guide pole
Rear of the PDP
Guide pole
Guide pole
Rear of the Media Station
Handling Description
9-9