Table of Contents
Advertisement
It refers to the capture times a face will be captured during its stay in the configured area.
The default value is 1.
Quick Shot
When the face picture grading value is higher than the quick shot threshold, the face picture
will be captured and uploaded. Otherwise, the picture with the highest grading value that
reaches the max. capture interval will be selected for upload.
Quick Shot Threshold
It stands for the quality of face to trigger quick shot.
Max. Capture Interval
It refers to the max. time occupation for one quick shot.
Capture Times
It refers to the capture times a face will be captured during its stay in the configured area.
Remove Duplicated Faces
This function can filter out repeated captures of certain face.
Similarity Threshold for Duplicates Removing
It is the similarity between the newly captured face and the picture in the duplicates removing
library. When the similarity is higher than the value you set, the captured picture is regarded
as a duplicated face and will be dropped.
Duplicates Removing Library Grading Threshold
It is the face grading threshold that triggers duplicates checking. When the face grading is
higher than the set value, the captured face is compared with the face pictures that are
already in the duplicates removing library.
Duplicates Removing Library Update Time
Every face picture is kept in the duplicates removing library for the set update time.
Face Exposure
Check the checkbox to enable the face exposure.
Reference Brightness
The reference brightness of a face in the face exposure mode. If a face is detected, the
camera adjusts the face brightness according to the value you set. The higher the value, the
brighter the face is.
Min. Duration
The minimum duration of the camera exposures the face.
Note
If the face exposure is enabled, please make sure the WDR function is disabled, and the
manual iris is selected.
Network Camera User Manual
88
Advertisement
Table of Contents
