Technical Data; Definitions: Safety Guidelines - DeWalt DCD992NT Original Instructions Manual

TOOL CONNECT™ CORDLESS 13 mm DRILL/DRIVER, DCD992
TOOL CONNECT™ CORDLESS 13 mm DRILL/DRIVER/
HAMMERDRILL, DCD997
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
1st gear
2nd gear
3rd gear
Impact rate
1st gear
2nd gear
3rd gear
Max. torque (hard/soft)
hard
soft
Chuck capacity
Maximum drilling capcity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745‑2:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a = m/s
h,D
Uncertainty K =
Impact drilling
Vibration emission value a = m/s
h,ID
Uncertainty K =
WALT one of the
E
DCD992 DCD997
V 18 18
DC
1 1
Li‑Ion Li‑Ion
W 820 820
Drill, Driver/Hammer
min ‑1 0–450 0–450/500
0–1300 0–1300/1500
0–2000 0–2000/2250
min ‑1 – 0–8600
– 0–25500
– 0–38250
Nm 95 95
Nm 66 66
mm 1.5–13 1.5–13
mm 55 55
15 15
– 13
kg 1.5 1.6
dB(A) 75 97
dB(A) 86 108
dB(A) 3 3
<2.5 <2.5
2
m/s 1.5 1.5
2
– 15.0
2
m/s – 3.9
2
Screwdriving
Vibration emission value a = m/s
h, D
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
a
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
English
DCD992 DCD997
<2.5 <2.5
2
m/s 1.5 1.5
2
3