Remove The Server From Rack - Lenovo ThinkSystem SR665 V3 User Manual

Remove the server from rack

Follow instructions in this section to remove the server from the rack.
S036
18 - 32 kg (39 - 70 lb)
CAUTION:
Use safe practices when lifting.
R006
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
CAUTION:
• Potential stability hazards exist. The rack might tip over and cause serious personal injury.
• Before extending the rack to the installation position, read the
Do not put any load on the slide-rail mounted equipment in the installation position. Do not leave
the slide-rail mounted equipment in the installation position.
About this task
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Procedure
Step 1. Loosen the two thumbscrews located on the front of the server to disengage it from the rack.
32 - 55 kg (70 - 121 lb)
and "Safety inspection checklist" on page 48
62.
"Installation Guidelines" on page
.
Chapter 5 Hardware replacement procedures
47.
to ensure that you
63