Erase Protection - Philips VR455 Manual

Load The Batteries as Follows:
1 Remove the Battery Compartment | 2 Install two batteries as indicated 3 Replace the lid.
lid from the bottom of the remote inside the Battery Compartment.
control. ®
6 Before ina Yc
T
Botto
Remote Control
Battery Replacement Caution
¢ Do not mix old and new batteries. (Also never mix alkaline batteries with manganese batteries.)
gm This remote control and batteries are supplied accessories. Please check to make sure they are included.
NOTE: Also, check the Specifications to see what other accessories are included.
a Types of Video Cassettes and Tape Speeds
You can change the recording speed for a tape using the Tape SPEED button.
2 Recording speeds: SP, SLP
3 Playback speeds: SP, LP, SLP
In this VCR, use only tapes with the (VHS) mark. The chart below shows the recording/playback time for 3 types of tapes (T160,
T120, T60). :
Tape Speed Selector Position
* During Playback, the VCR selects the tape speed, SP, LP, or SLP, automatically.
3 Erase Protection
Cassettes have a Record Tab to ensure that recordings are not accidentally erased.
¢ To prevent accidental erasure: ¢ To record again:
GN
Cover the hole with
VCR Tape Cassette cellophane tape.
Break off the tab with a
screwdriver.
4 Please Read and Relax
Please read all the instructions for each feature before attempting that Now, tam the page to begin hooking
up your VCR.
feature. For example, read all the steps for Timer Recording (pages
15-16) before doing a Timer Recording.