Panasonic TC-L37D2 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. LCD TV
  5. TCL37D2 - 37" LCD TV
  6. Service manual
Panasonic TC-L37D2 Service Manual

Panasonic TC-L37D2 Service Manual

37 inch class 1080p lcd hdtv la04 chassis
Hide thumbs Also See for TC-L37D2:
Table of Contents

Advertisement

Quick Links

Download this manual
37 inch Class 1080p LCD HDTV
TC-L37D2
Model No.
LA04 Chassis
© Panasonic Corporation 2010.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.MTNC100443CE
B01 Canada: B61

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-L37D2

Summary of Contents for Panasonic TC-L37D2

  • Page 1 ORDER NO.MTNC100443CE B01 Canada: B61 37 inch Class 1080p LCD HDTV TC-L37D2 Model No. LA04 Chassis © Panasonic Corporation 2010. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 11.11. A-Board (10/13) Schematic Diagram --------------- 45 1.1. General Guidelines ----------------------------------------3 11.12. A-Board (11/13) Schematic Diagram --------------- 46 2 Warning --------------------------------------------------------------4 11.13. A-Board (12/13) and V-Board Schematic 2.1. Prevention of Electrostatic Discharge (ESD) Diagram ---------------------------------------------------- 47 to Electrostatically Sensitive (ES) Devices ----------4 11.14.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.

  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 6: Service Navigation

    3 Service Navigation 3.1. Service Hint Board Name Function A-Board Speaker out, AV Terminal, HDMI in, SD Card, PC in, iPod Digital Signal Processor, Nile-Tcon, Tuner V-Board Remote Receiver, LED TC-Board T-CON P-Board Power (AC/DC), DC-DC Non serviceable P-Board should be exchanged for service. Control Panel Assy Control Button, Power switch Non serviceable...

  • Page 7: Specifications

    4 Specifications Power Source AC 110-127 V, 60 Hz Power Consumption Maximum 130 W Standby Condition 0.3 W Display panel Aspect Ratio 16:9 Visible screen size 37 inch class (37.0 inches measured diagonally) (W × H × Diagonal) 32.2 inch × 18.1 inch × 37.0 inch (819 mm × 460 mm × 940 mm) 2,073,600 (1,920 (W) ×...

  • Page 8: Service Mode

    5 Service Mode 5.1. How to enter into Service Mode While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds. 5.1.1. Key command [1] button...Main items Selection in forward direction [2] button...Main items Selection in reverse direction [3] button...Sub items Selection in forward direction [4] button...Sub items Selection in reverse direction...
  • Page 9 Contents of adjustment mode 5.1.2. • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...

  • Page 10: Srv-Tool

    5.2. SRV-TOOL 5.2.1. How to access 1. Select [SRV-TOOL] in Service Mode. 2. Press [OK] button on the remote control. 5.2.2. Display of SOS History SOS History (Number of LED blinking) indication. From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment. This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory ship- ment setting].

  • Page 11: Hotel Mode

    5.3. Hotel mode 1. Purpose Restrict a function for hotels. item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode off/on In order to display the Hotel mode setup menu, please Input Select input signal modes. enter the following command (within 2 second).

  • Page 12: Data Copy By Sd Card

    5.4. Data Copy by SD Card 5.4.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
  • Page 13 5.4.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
  • Page 14 5.4.4. Data copy from to SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.

  • Page 15: Troubleshooting Guide

    6 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 6.1. Check of the IIC bus lines 6.1.1. How to access Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.

  • Page 16: Power Led Blinking Timing Chart

    6.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.

  • Page 17: No Power

    6.3. No Power First check point There are following 2 states of No Power indication by power LED. 1. No lit 2. Red is lit then turns red blinking a few seconds later. (See 6.2.)

  • Page 18: Disassembly And Assembly Instructions

    7 Disassembly and Assembly Instructions 7.1. Pedestal 7.3. AC cord 1. Lay down the unit so that the rear cover faces upward. 1. Remove the bushing of the AC cord from the AC cord 2. Remove the 4 screws. bracket. 3.

  • Page 19: P-Board

    7.4. P-Board 7.5. Side AV bracket 1. Remove the 5 screws (C). 1. Remove the Metal side AV bracket. 2. Remove the 1 screw (D). 3. Disconnect the connectors (CNAC, CN01, CN02 and P2). 4. Remove the P-Board. 2. Remove the 1 screw. 5.

  • Page 20: A-Board

    7.6. A-Board 7.7. Control panel 1. Remove the 4 screws. 1. Disconnect the connector (K1). 2. Disconnect the connectors (A03, A04, A10, A11 and 2. Remove the control panel. A21). 3. Remove the A-Board. 7.8. Speaker 4. Remove the A-Board barrier. 1.

  • Page 21: Metal Bracket Bottom

    7.9. Metal bracket bottom 7.10. TC-Board 1. Remove the 4 screws (E). 1. Remove the 2 screws. 2. Remove the 2 screws (F). 2. Disconnect the connectors (TC01, TC04, TC05 and 3. Remove the Metal bracket bottom. TC06). 3. Remove the TC-Board. 4.

  • Page 22: Metal Support

    7.11. Metal support 7.12. LCD Panel 1. Remove the 4 screws. 1. Remove the LCD panel. 2. Remove the Metal support top. 3. Remove the 8 screws. 4. Remove the Metal support corner. 5. Remove the 1 screw. 6. Remove the Metal support side. 7.

  • Page 23: Emi Processing

    7.14. EMI processing...

  • Page 27: Measurements And Adjustments

    8 Measurements and Adjustments 8.1. VCOM Adjustment (Flicker Adjustment) 8.1.1. General information: When replacing LCD panel, TC board (T-CON) or both, [VCOM] Adjustment have to be done. Data for VCOM Adjustment is different depend on the LCD panel and the data is stored in TC board. Adjustment procedures are as follows.

  • Page 28: Voltage Chart Of A-Board

    8.2. Voltage chart of A-board VOLTAGE TEST POINT SPECIFICATION (Reception state) STB3.3V TP4716 3.3 ± 0.16 V SUB5V TP4724 5 ± 0.25 V PANEL12V TP5413 12 ± 0.6 V SOUND15V TP2765 18 ± 2 V TP2768 6.1 ± 0.3 V SUB6V TP2767 6.1 ±...

  • Page 29: Block Diagram

    9 Block Diagram 9.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR TMDS DATA HDMI3 (SIDE) TMDS DATA HDMI I/F HDMI2 RECEIVER SD CARD DATA TMDS DATA SD CARD SD CARD DATA HDMI1 SLOT IFD_OUT FRONT END Nile-TCON SIF_OUT PROCESSOR DDR2 TUNER EEPROM IIC2 STB5V...

  • Page 30: Block (1/3) Diagram

    9.2. Block (1/3) Diagram DIGITAL SIGNAL PROCESSOR D2500A SN2500 POWER LED C.A.T.S. R_LED_ON POWER LED(R) SENSOR POWER LED C.A.T.S. C.A.T.S. RM2500 REMOTE RECEIVER REMOTE IN REMOTE IN SUB5V REMOTE C.A.T.S. SENSOR SUB+5V RECEIVER STB3.3V STB+3.3V +3.3V CONTROL PANEL ASSY KEYSCAN1 KEYSCAN1 OPERATION KEYS KEYSCAN3...

  • Page 31: Block (2/3) Diagram

    9.3. Block (2/3) Diagram SPEAKER_L SPEAKER_R JK2102 D2142 JK2101 JK4500 JK2108A OPTICAL VIDEO2 JK8502 JK4502 JK4501 AUDIO TU8302 HDMI IN 3 (SIDE) COMP1 VIDEO1 SD CARD i-Pod HDMI IN 1 HDMI IN 2 ANT IN (SIDE) TUNER SUB3.3V_SD IIC0_TU 3.3V IC5613 IIC0 IIC0_TU...

  • Page 32: Block (3/3) Diagram

    9.4. Block (3/3) Diagram CN01 174V #1 Anode Cathode Cathode 174V PANEL #2 Anode BACK LIGHT P-BOARD CONTROL 174V CN02 CIRCUIT #3 Anode PANEL Cathode LCD PANEL Cathode #4 Anode TCON PANEL CONTROL TC01 FOR RIGHT GMA3,4,6,7, 12,13,15,16 RMLV0N/P-RMLV5N/P IC9206 rDAC LVCC3.3V TC06...

  • Page 33: Wiring Connection Diagram

    10 Wiring Connection Diagram 10.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 10.2. Wiring (1)

  • Page 34: Wiring (2)

    10.3. Wiring (2)

  • Page 35: Schematic Diagram

    11 Schematic Diagram 11.1. Schematic Diagram Notes...

  • Page 36: A-Board (1/13) Schematic Diagram

    11.2. A-Board (1/13) Schematic Diagram IC8001 A-BOARD TXN/A10QAMS (1/13) C1AB00003249 Nile-TCON GPIO/IRQ_MCU DVSS/AVSS R8050 IC8001 IC8001 AC19 SUB1.2V IC8001 P76_CEC_IN P76 CEC_IN DDR_VCC_POST IC8001 IC8001 IC8001 P75_AVLINK1IN P75 CEC_OUT L8006 R8051 IC8001 IC8001 AD18 J0JHC0000045 IC8001 AC10 VDD18DDR STB3.3V C8127 IC8001 VDD12HDMI C8082...

  • Page 37: A-Board (2/13) Schematic Diagram

    11.3. A-Board (2/13) Schematic Diagram A-BOARD TXN/A10QAMS (2/13) IC8001 IC8002 C1AB00003249 C3ABSY000043 Nile-TCON DDR2 DDR2IF 84FBGA DDR2 800Mz x 16bit SUB1.8V L8000 DDR_VCC_POST J0JHC0000045 C8097 CH0DM0 DDRDM0 AD10 IC8001 IC8002 CH0DM1 DDRDM1 AD13 IC8001 IC8002 IC8002 CH0DQS0_N IC8002 VDDQ DDRDQSN0 IC8001 IC8002 UDQS...

  • Page 38: A-Board (3/13) Schematic Diagram

    11.4. A-Board (3/13) Schematic Diagram A-BOARD TXN/A10QAMS (3/13) STB3.3V R8531 AA_XECS0 R8515 XECS0 EXB2HV680JV AA_ED0 EBDAT0 R8532 AA_ED1 TO 1/13 L8500 AA_XERE EBDAT1 XERE AA_ED2 J0JHC0000045 AA_XEWE0 EBDAT2 XEWE0 AA_ED3 EBDAT3 R8533 AA_ED4 EBDAT4 MCU_XRST AA_ED5 R8528 MCU_XRST TO 1,4,7/13 EBDAT5 4.7k AA_ED6...

  • Page 39: A-Board (4/13) Schematic Diagram

    11.5. A-Board (4/13) Schematic Diagram A-BOARD TXN/A10QAMS (4/13) SUB3.3V SUB5V SUB3.3V D5670 B0ACCJ000048 SUB1.2V IC5606 VOUT C5701 C5700 F15V C0DBAYY00755 6.3V 6.3V 4.7u 4.7u SUB1.2V ON/OFF L5613 R5705 C5695 J0JHC0000075 0.01u C5733 C5730 C5731 C5692 BOOT C5734 C5694 "H": ON "L": OFF SUB1.2V 0.1u...

  • Page 40: A-Board (5/13) Schematic Diagram

    11.6. A-Board (5/13) Schematic Diagram C2103 A-BOARD TXN/A10QAMS (5/13) L2123 6.3V J0JCC0000287 R2307 TO 9/13 RF_V VCVS1IN U_TU_V/A_TU_V TO 1/13 US AV1_S C2304 6.3V VY1IN TO 1/13 C2303 0.1u VC1IN US AV1 C2214 L2125 6.3V J0JCC0000287 R2301 U_AV1_V/A_AV2_V__TERMINAL VCVS2IN U_AV1_V/A_AV2_V R2391 C2211 R2286...

  • Page 41: A-Board (6/13) Schematic Diagram

    11.7. A-Board (6/13) Schematic Diagram A-BOARD TXN/A10QAMS (6/13) R2384 I2C/I2S/RESET R2385 R2386 OPERATE AUDIO_XRST TO 1/13 OPERATE R2387 RESET AUDIO_XRST OPERATE 24KEC_I2CDATA1_AMP MUTE RESET 24KEC_I2CDATA1_AMP TO 13/13 R2327 24KEC_I2CCLK1_AMP 24KEC_I2CCLK1_AMP R2300 R2342 J0JBC0000116 48KHz LRCLK_POST LRCLK R2343 R2303 J0JBC0000116 12.288MHz MCLK_POST MCLK TO 1/13...

  • Page 42: A-Board (7/13) Schematic Diagram

    11.8. A-Board (7/13) Schematic Diagram A-BOARD TXN/A10QAMS (7/13) STB3.3V IC4700 STB3.3V SUB1.2V C1ZBZ0004161 STB3.3V R4809 SUB1.8V ANALOG-ASIC Q4703 R4821 R4831 SUB5V DSC2001S0L Q4704 100k R4748 DSC2001S0L R4830 100k STB3.3V STB5V SUB5V STB1.2V Q4702 SC_OHZ DSC2001S0L R4753 P3.3V D_SOS_RSV C4772 TEST R4742 0.1u SS_SOS8...

  • Page 43: A-Board (8/13) Schematic Diagram

    11.9. A-Board (8/13) Schematic Diagram A-BOARD TXN/A10QAMS (8/13) R4520 R4519 R4515 HPLUG_A HPLUG_B HPLUG_C R4565 R4507 R4566 R4504 R4567 R4506 DDC5V_A DDC5V_B DDC5V_C C4541 C4540 C4539 6.3V 6.3V 6.3V TO 1/13 TO 1/13 TO 1/13 R4527 R4503 R4525 R4505 R4526 R4502 4.7k 4.7k...

  • Page 44: A-Board (9/13) Schematic Diagram

    11.10. A-Board (9/13) Schematic Diagram A-BOARD TXN/A10QAMS (9/13) SUB5V L8306 J0JHC0000045 SUB5V R8341 R8307 AG_RF_AFT RF_AFT TO 1/13 C8370 R8335 Q8308 0.1u DSA2001S0L TP8302 R8339 RF_V R8330 RF_V TO 5/13 Q8305 R8337 R8334 C8315 2.2k R8302 DSA200100L 1000p TU_SIF SIFIN TO 1/13 SUB5V_TUNER R8336...

  • Page 45: A-Board (10/13) Schematic Diagram

    11.11. A-Board (10/13) Schematic Diagram A-BOARD TXN/A10QAMS (10/13) USA model PC MODEL JK2101 K1U812A00001 JK2108A AV TERMINAL K1FY315A0006 PC IN U_AV1_V/A_AV2_V__TERMINAL U_AV1_L/A_AV2_L__TERMINAL R3124 R3015 TP3101 PC_R_TERMINAL U_AV1_R/A_AV2_R__TERMINAL R3125 R3016 TP3102 Y-SW PC_G_TERMINAL U_NONUSE_A_AV1_YSW__TERMINAL R3126 PDP_U_YPBPR2_Y/LCD_U_YPBPR1_Y/A_AV1_Y__TERMINAL R3017 TO 5/13 TO 5/13 TP3103 PC_B_TERMINAL PDP_U_YPBPR2_PB/LCD_U_YPBPR1_PB/A_AV1_PB__TERMINAL...

  • Page 46: A-Board (11/13) Schematic Diagram

    11.12. A-Board (11/13) Schematic Diagram A-BOARD TXN/A10QAMS (11/13) LVDS TC-BOARD (TC05) Nile-TCON IC8850 LVDS OUT TO 1/13 C0DBGYY00203 ZWEI2 PANEL_AGW/AVDD_ENB LVDS 3.3V R4861 R4251 R8851 2.2k R4216 R4806 GRAB_MODULE_IIC/PWM_POW_ON OENB TO 1/13 TP4254 R4217 R8852 ON/OFF VADJ PANEL_TEST_ON/VDD25_EN FAN_MAX/LCD_EEP_WP/ZWEI_VOUT_ENB OEBLK FL4201 TP4255 R4218...

  • Page 47: A-Board (12/13) And V-Board Schematic Diagram

    11.13. A-Board (12/13) and V-Board Schematic Diagram A-BOARD TXN/A10QAMS (12/13) CONNECTER for LCD to INV SUB5V Q2761 R2767 DSC200100L R2770 R2769 R2765 LCD model A-P CONNECTOR PANEL_STBY_ON/PANEL_VCC_ON TO 1,11/13 Q2760 R2766 DSC200100L P-BOARD (P2) ECO_ON/INVERTER_ON R2757 STB3.3V 1.8k R2763 C4792 TO 7/13 STB5V_SW_ON R4822...

  • Page 48: A-Board (13/13) Schematic Diagram

    11.14. A-Board (13/13) Schematic Diagram A-BOARD TXN/A10QAMS (13/13) FACTORY SUB5V STB5V FACTORY SBO0 STB3.3V STB5V TP4726 SBI0 TP4732 STB3.3V IIC_CONT TP4712 UA0EXCLK TP4734 UARTS0_N STB5V UACTS0_N TO 1/13 FACTORY UATXD0 TP4723 UATX/RX0 : YAMON UARXD0 STB5V UATXD1 TP4700 UATX/RX1 : Kernel TO 1,6/13 24KEC_I2CCLK0 (Tuner)

  • Page 49: Tc-Board (1/6) Schematic Diagram

    11.15. TC-Board (1/6) Schematic Diagram TC-BOARD TXNTC10QAMM (1/6) CONNECTOR LVDS-Rx A-BOARD TC05 (A21) TP9028 R9002 OENB TP9015 TO 2/6 R9003 OEBLK TP9031 R9021 Z_SCL0 TP9029 TO 1/6 R9022 Z_SDA0 TP9016 LD/PWM R9001 R9011 TP9017 Z_RXAN0 TP9003 Z_RXAP0 R9012 TP9018 Z_RXBN0 TP9004 Z_RXBP0 R9013...

  • Page 50: Tc-Board (2/6) Schematic Diagram

    11.16. TC-Board (2/6) Schematic Diagram IC9006 MN85061 TC-BOARD TXNTC10QAMM (2/6) ZWEI2 IC9006 DATAOUT VDD1.2V ZW1.2V IC9006 DATAIN IC9006 IC9006 STBY L9004 L9006 L9009 L9011 C9036 J0JHC0000045 J0JHC0000046 J0JHC0000046 J0JHC0000045 IC9006 SCLK C9042 C9059 C9073 C9083 IC9006 POUT 6.3V 6.3V LVDS miniLVDS TO 1/6 PWMA...

  • Page 51: Tc-Board (3/6) Schematic Diagram

    11.17. TC-Board (3/6) Schematic Diagram TC-BOARD TXNTC10QAMM (3/6) DCDC12V PNL12V L9015 L9016 G1C100MA0077 J0JHC0000075 C9119 R9114 C9104 0.1u R9116 3.3V/1.2V C9106 C9108 TP9061 ZW1.2V R9109 DRVH1 VBST1 DRVL1 L9014 G1C2R2Z00006 PGND1 Q9008 R9118 B1MBDDA00003 C9112 C9114 C9116 6.3V 6.3V 6.3V R9104 R9107 TRIP1...

  • Page 52: Tc-Board (4/6) Schematic Diagram

    11.18. TC-Board (4/6) Schematic Diagram TC-BOARD TXNTC10QAMM (4/6) LVCC3.3V TP9201 C9240 0.1u TC08 FACTORY R9246 TP9202 4.7k TP9203 R9247 TP9204 R9248 *IC9202 C9234 R9239 TVRR446S EEPROM LVCC3.3V LMLVDD3.3V R9219 LVCORE1.2V C9230 0.1u X9201 H2D100500004 R9222 R9234 R9324 R9243 4.7k R9221 R1AM R9201 R1AP...

  • Page 53: Tc-Board (5/6) Schematic Diagram

    11.19. TC-Board (5/6) Schematic Diagram TC-BOARD TXNTC10QAMM (5/6) PNL12V *R9374 *R9380 PNL12V 8.2k R9303 *C9271 270p Q9202 TP9210 LVDD16V R9325 L9204 B1DHCD000023 *R9266 G1C220MA0234 R9329 1.8k D9205 B0JCPE000004 C9272 C9275 C9277 *R9308 *C9279 C9290 *R9337 C9263 C9264 C9265 C9266 C9285 C9286 C9288 100k...

  • Page 54: Tc-Board (6/6) Schematic Diagram

    11.20. TC-Board (6/6) Schematic Diagram TC-BOARD TXNTC10QAMM (6/6) LVDD16V LVCC3.3V LVDD16V LVCC3.3V C9298 C9302 C9304 C9305 C9307 C9300 C9301 C9306 0.1u 0.01u 0.1u 0.1u 0.01u 0.1u TP9224 TO 6/6 Z_OUT TO 6/6 GMA1 CLK1 GMA3 TP9229 CLK2 GMA4 TO 5,6/6 CLK3 GMA6 TP9225...

  • Page 55: Printed Circuit Board

    12 Printed Circuit Board 12.1. A-Board A-BOARD (FOIL SIDE) TXN/A10QAMS TP8026 D1002 R2767 R2770 R2769 R2768 Q 2 7 6 0 TP8028 D1004 R2764 Q 5 4 3 1 R2757 R2765 R2766 R5432 R4779 D5777 R2759 R5431 ZA5415 ZA5406 ZA5409 D5771 R4556 C4746...
  • Page 56 A-BOARD (COMPONENT SIDE) TXN/A10QAMS Q 5 6 1 3 R5670 L5613 C5734 R8065 R8064 I C 8 0 0 4 A 0 3 Q5612 IC8004-A IC8004 D1006 R4762 I C 5 6 1 3 R5673 R5671 C8011 D1003 C5733 C5707 C5706 I C 5 6 1 0 A 1 8...

  • Page 57: V-Board

    12.2. V-Board V-BOARD (FOIL SIDE) TXN/V10QMMM T P 2 5 0 7 T P 2 5 0 0 T P 2 5 0 2 TP2507 TP2500 T P 2 5 0 1 TP2502 TP2501 TP2506 T P 2 5 0 4 P b F T P 2 5 0 3 TP2503...

  • Page 58: Tc-Board

    12.3. TC-Board TC-BOARD (FOIL SIDE) TXNTC10QAMM TP9057 TP9059 TP9054 C9133 R9102 TP9058 TP9060 R9168 TP9032 R9169 C9096 TP9056 TP9035 R9101 TP9028 TP9031 TP9055 TP9061 TP9016 TP9033 R9114 C9104 TP9036 TP9037 R9001 R9109 R9116 R9085 TP9015 TP9029 R9118 R9089 R9096 R9088 R9107 C9240 R9094...

  • Page 59: Exploded View And Replacement Parts List

    13 Exploded View and Replacement Parts List 13.1. Exploded View and Mechanical Replacement Parts List 13.1.1. Exploded View...
  • Page 60 13.1.2. Accessories...
  • Page 61 13.1.3. Mechanical Replacement Parts List...
  • Page 62 Ref. Safety Part No. Part Name & Description Q'ty Remarks 10030-0047500 BATTERY COVER 1 PAVCA EAB1428AL SP_UNIT-L 1 PAVCA EAB1428AR SP_UNIT-R 1 PAVCA J0KG00000011 FERRITE CORE (AC CORD) K0RB00700017 CONTROL_PANEL_ASSY 1 CIRCUIT BOARD&PANEL PAVCA K1PY51Y00045 LVDS CABLE 1 PAVCA K2CB2YY00024 AC CORD 1 PAVCA L5EDD9T00034...

  • Page 63: Electrical Replacement Parts List

    13.2. Electrical Replacement Parts List 13.2.1. Replacement Parts List Notes...
  • Page 64 13.2.2. Electrical Replacement Parts List Safety Ref. No. Part No. Part Name & Pcs Remarks Description Safety Ref. No. Part No. Part Name & Pcs Remarks C2309,10 F1H1A225A051 C 22UF, 50V Description C2501 F2G0J470A019 E 47UF 6.3V C2502 F1G1C103A116 C 0.010UF, K, N0AE4JJ00007 CIRCUIT BOARD P PAVCA TXN/A10QAMS...
  • Page 65 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description C5706 F1G1E103A123 C 0.010UF, K, C8069 F1G1C104A116 C 0.10UF, K, 16V C8070 F1G1H102A730 C 1000UF, 50V C5707 F1G1C104A116 C 0.10UF, K, 16V C8071 F1G1C104A116 C 0.10UF, K, 16V C5708,09...
  • Page 66 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description C8851,52 ECJ1VB1A105K C 0.01UF, Z, 10V C9273 F1G1H151A731 C 150PF, K, 50V C9001 F1H1H103A970 C 0.001UF, K, C9274 F1H1H223A970 C 0.22UF, K, 50V C9275 F1K1E106A136 C 10UF, Z, 25V...
  • Page 67 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description FL2102-04 J0HABB000004 LC FILTER L8500,01 J0JHC0000045 CHIP INDUCTOR FL4201-03 EXC28CE201U FILTER L9003 J0JHC0000045 CHIP INDUCTOR FL4804,05 EXC28CE201U FILTER L9004 J0JHC0000046 CHIP INDUCTOR FL9001-08 EXC28CE900U...
  • Page 68 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R2260 D0GA303JA015 M 30K OHM J PAVCA R2759-61 D0GA101JA015 M 100 OHM, 0.063W J,0.063W R2265 D1BB75R0A055 M 75 OHM, 1/10W R2763,64 D0GA473JA015 M 47KOHM, J,0.063W...
  • Page 69 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R3265 D0GAR00Z0001 C 0 OHM, 0.063W R4802 EXB2HV220JV RESISTOR ARRAY R3267-71 D0GAR00Z0001 C 0 OHM, 0.063W R4803 D0GA472JA015 M 4.7KOHM, J,0.063W R3272 J0JBC0000116 COIL...
  • Page 70 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R5680 D1BA2201A014 M2.2 KOHM, R8099 ERJ2GEJ102X M 1K OHM J 1/4W 0.063W R8100 D0GA223JA015 M 22K OHM J R5681 D1BB4702A087 M 47KOHM, 1/10W PAVCA...
  • Page 71 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R8531-33 D0GA680JA015 M 47 OHM, R9119 D1BB2402A055 M 24KOHM, 1/10W J,0.063W R9125,26 D0GA101JA015 M 100 OHM, R8538 D0GA472JA015 M 4.7KOHM, J,0.063W J,0.063W R9130...
  • Page 72 Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R9294 D1BA1003A014 M 100KOHM, PAVCA X9001 H0J270500113 CRYSTAL 0.063W X9201 H2D100500004 CRYSTAL R9297 D0GAR00Z0001 C 0 OHM, 0.063W R9298,99 D1BA20R0A014 M 20 OHM, 0.063W PAVCA...

Table of Contents