Using Channel; Video Output; Index - Sony KP-53HS10 Operating Instructions Manual

SWAP
Press to switch the audio and video of the right and
left pictures.
Each time you press SWAP, the picture and sound
of the two will be exchanged.
i iii i !!!i ¸
Press to cancel the P&P function and return to
normal viewing.
Notes:
• If one of the pictures received through P&P is
snowy, the entire screen may become unstable. In
this case, erase the snowy channel. (see
"CHANNEL SKIP" on page 37)
• If you select VIDEO 5 when the right picture is
active, the left picture disappears and you can view
the picture from VIDEO 5 (DTV) IN. When the left
picture is active, you cannot view the picture from
VIDEO 5 (DTV) IN.
Using CHANNEL
INDEX
You can use the CHANNEL INDEX feature to
display multiple channels and select one directly.
Channels used for CHANNEL INDEX will come
directly from the TV's list of receivable channels
(those set during AUTO PROGRAM or through
the CHANNEL SET UP menu).
r ote:
•
The CHANNEL INDEX feature is not available
for the inputs from VIDEO 5 (DTV) IN.
1
Press (_).
The current channel will be reduced in size and
displayed in the center of the screen in normal
motion picture format. The first twelve
receivable channels will appear one after
another, clockwise, around the center picture.
These small pictures are updated in intervals of
one second. The channel number and channel
caption (if set) on the second and later
appearances will dim.
A cyan-colored frame will appear to indicate
current channel selection.
2
Move the joystick in any direction to move the
cyan frame to the picture that you wish to view,
and press (_).
The selected channel will zoom in and move to
the center, and the sound of that channel will
be heard.
3 If you wish to view another channel, repeat
step 2.
To view the normal picture of the selected
channel, proceed to step 4.
4 PressQ.
The center picture will be enlarged for normal
viewing.
0
".1
(continued)
31