Dvd Player With Svideo And Audio Connectors - Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
Use this connection if your DVD player does not have component
video (Y,
PB, PR)
jacks.
Toconnect _ OVO player with A/V connectors
Use an audio cable to connect the DVD player's audio output
jacks to the TV's audio input jacks.
2 Use an S VIDEO cable to connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
SVDEO
cable
m
V1DEO
L
ALIDI(
2
Audio cable
VIDEO IN
@
ml_l_ AUDIO
o_ I__
Notes on Usin_ This Connection
Watch the DVD player Press 1V/VIDEOrepeatedly to select the DVD input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control.
to operate the DVD player See "Programming the Remote Control" on pages 43-44.
Activate the TV remote ()pen the outside cover, as shown on page 42. Then set the A/V slide s witch
control to operate the DVD to the position you programmed for the DVD player.
player
Control DVD functions with See "Operating a DVD Player" on page 61.
the TV remote control
Label video inputs to easily See the il_structions for setting up Video Labels on pages 74-75.
identify equipment connected
to the TV