Download Print this page

Yamaha EQ-500U Owner's Manual page 5

Natural sound stereo graphic equalizer
Hide thumbs Also See for EQ-500U:

Advertisement

E CONNECTING AN AMPLIFIER OR
RECEIVER
Check from the connection diagram that you have
made the correct connections. Please note that input
procedures and program source selection may vary
according to the capabilities of the amplifier or
receiver and the connections between it and this unit.
® To connect an integrated amplifier or receiver
using the ACCESSORY jacks:
The ACCESSORY jacks are provided on some 5 of
Yamaha's newest amplifiers and receivers.
|
1. Connect the SEND jacks of the ACCESSORY
jacks to the LINE IN of this unit.
jacks to the LINE OUT of this unit.
The program source selected with the integrated
amplifier's or receiver's input selector can be
equalized.
WIESE?
AMPLIFIER
EE
eas
( )
aS
ee
gr
mjo meS T
fy ees
EQ-500U ©
a
The following operations can be carried out via the
amplifier or receiver:
Program Source
Setting
With a REC
OUT selector.
Selected with the | Set the INPUT
REC OUT
SELECTOR to
Selector.
TAPE.
Selected with the
input selector.
switch.
ON.
With a TAPE
MONITOR
Turn the TAPE
MONITOR switch
INTEGRATED AMPLIFIER
EQ-500U
lei]
® To connect a separate amplifier or receiver:
1. Connect the FRE OUT jacks of the control
amplifier to the LINE IN jacks of this unit.
In this way, you will be able to equalize the program
source selected with the control amplifier input
The pink noise level cannot be adjusted with the
OUTPUT
control amplifier's volume control. Adjust the volume
level with the OUTPUT LEVEL control of this unit.
EQ-500U
INPUT
POWER AMPLIFIER
E CONNECTING A TAPE DECK
= - Connect the tape deck to the TAPE jacks. Connect
the PLAY jacks to the tape deck's LINE OUT terminal,
and the REC jacks to the tape deck's LINE IN jacks.
OUTLET)
This is an unswitched auxiliary outlet which can be
used to supply power to other audio equipment. The
other equipment must have a power consumption
rating less than 400W. Power will be supplied even if
this unit is turned off.
CAUTION: |
u
Always be sure to check that the power consumption
of the unit you are connecting is less than 400W.

Advertisement

loading