Setting Up The Timer - Sony SAT-A4 Operating Instructions Manual

Setting Up the Timer
You can select from two ways to automate VCR recording of programs:
[] Setting the Timer and then setting your VCR timer.
KI Setting the Timer and using the Sony IR Blaster to automatically
control the VCR (see "Connecting the IR Blaster" on page 18, and
"VCR Recording" on page 66 for details).
Setting the Timer
One Button Recording
If you've entered the Timer Setup
screen by selecting afuture program
from a program guide, the Day, Start
and Stop times, Station, and program
title are displayed automatically.
However, if you make any changes to
the Timer Setup options, the program
title disappears (although the Timer
will still work as you've set it).
To set the timer:
1 Press the MENU button to bring uP the Main Menu.
2 Select TIMER SETUP. The Tuner Setup screen appears.
Shortcut
You can automatically add future programs to the Timer screen by just
selecting them from the program guide. See "Selecting a Program from the
Guide" on page 28for details.
3 Select one of the 10 timer setting buttons. Then highlight the DAY
field (today's date automatically appears).
TIMER SETUP
DAY START STOP STATION
[ rgg l -:-- -:--
-:-- -:--
-:-- .:..
-:.- .:__
[2 2
4
Set the day, start time, stop time, and station number as follows:
o
o
To set each item (day, time, etc.), move the joystick up or down
(SAT-A4) or press up or down arrow buttons (SAT-B3).
To move to the next or previous item, move the joystick right
or left (SAT-A4) or press the right or left arrow buttons (SAT-
B3).
Note
You can set the timer up to 30 days in advance. You can also set the timer for
every day or for the same day(s) every week. See "Setting the Daily/Weekly
Timer" on page 36.
5 Select OK to save your settings.
35