Number Buttons; Record Button; Dvd Menus - Pioneer VSX-D409 Operating Instructions Manual

[memo]
mode.
VSX-D509S/D509S-G
S
OE & es)
| Ft ey ()
«
hy
(=)
a oD,
me)
3) W) CK
@ © SOURCE
Press to switch the DVD/LD player between STANDBY
and ON.
@ wae
Press to return to the start of the current chapter
(track). Repeated presses
skips to the start of previous tracks. When controlling
a DVR, use this
button to go back channels {channel ~).
@ >
Press to advance to the start of the next chapter
(track), Repeated presses
Skips to the start of following tracks. When controlling
a DVR, use this
button to go forward channels (channel
+).
:
@Ou
Press to pause playback (on some models this
will freeze-frame the
picture),
© Number buttons
Use the number buttons to Navigate the on-screen
display.
The ENTER button is used as a SETUP button for
the DVD players internal
menus (VSX-D509S/D509S-G only). The +10 button
is used to select tracks
higher than 10.
© >>
Hold down for fast forward playback.
D ~<«<
Hold down for fast reverse playback.
Or
Press to start playback (on some modeis,
iS empty will cause the disc tray to open).
Qa
Press to stop playback (on some models, pressing
this when the disc is
already stopped will cause the disc tray to open).
a MENU
Displays menus concerning the current DVD or
DVR you are using.
@ USE THESE BUTTONS TO NAVIGATE
DVD MENUS
A rup
Vv :down
ENTER :enter the command selected
~< left
> tright
& @ RECORD Button (VSX-D509S/D509S-G
only) ©
Use to start recording. To prevent accidental recording,
this button must be
pressed twice to take effect (the second press
must be within 10 seconds
of the first).
«3 ENTER (VSX-D409/D409-G : TOP MENU)
Use to display the lead trailer on a DVD.
'UO!