Advertisement

Quick Links

USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Lenovo smart lock E2

  • Page 1 USER MANUAL...
  • Page 2: Admin Settings

    1 : ADMIN SETTINGS For the first time: Wake up the keyboard and press [*] [#] in turn, the voice prompt "Please verify administrator", press "123456", press [#] to confirm. The voice prompts "Verified passed" to start adding the administrator. After setting the administrator: press [*] [#] after waking up the keyboard, the voice prompt "Please verify the administrator", press the administrator fingerprint, password or swipe card, and the voice prompt "Verify passed"...
  • Page 3: Add Administrator

    2 : ADD ADMINISTRATOR 1. Add User 1. Add an Administrator Fingerprint 2. Delete User 1. Add an Administrator 2. Add an Admin Card 3. System Settings 2. Add Reguler Users 3. Add an Administrator Password 4. Enter The Query Press [*] and then [#] to enter the menu, and press [1] [1] to enter the add administrator information.
  • Page 4: Delete User

    4 : DELETE USER 4.1 : GROUP DELETION 1. Add User 1. Clear the non-administrator Fingerprint 2. Delete User 1. Group Deletion 2. Clear the non-admin Card 3. System Settings 2. Delete by Number 3. Clear the non-administrator Password 4. Enter The Query Press [*] and then [#] to enter the menu, and press [2] [1] to Group Deletion.
  • Page 5: Network Setting

    Select a device type. On the page that appears, enter the password for connecting to the 2.4 GHz Wi-Fi network. The location permission must be granted to automatically find Wi-Fi networks. Lenovo Smart Lock E2 Select "Add Device" >"Camera & Lock" > Lock (Wi-Fi).
  • Page 6: Restore Factory

    7 : RESTORE FACTORY When prompted to restore factory settings, confirm that please press the [#] key, and press the [*] key to cancel. CAUTION Press This Key to Restore Factory After the factory Settings are restored, all user data will be Defaults cleared.
  • Page 7 9 : OPENING METHODS 9.1 : NORMALLY OPENING MODE After unlocking, the [0] key lights up and long presses [0] and the system automatically enters normally open mode. After entering the correct fingerprint, password, and key card, the normally open mode is turned 9.1 : DUAL OPEN MODE In dual-open mode, two-factor authentication is required to unlock successfully, for example: pass- word + fingerprint, password + key card, fingerprint + key card.
  • Page 8 10 : EMERGENCY OPENING METHODS In case of emergency such as forgetting the password, running out of battery, or the system not working, you can use a mechanical key to unlock the lock or use the emergency charging port to unlock.
  • Page 9 www.lenovosmartlock.com...

Table of Contents