KitchenAid KGC3155 Owner's Manual page 8

5.
If the food has already been added, remove the Ceramic Pot for 3 seconds and reinsert
pot in the cooker.
NOTE: Adding food without selecting the cook mode first will limit the unit of measurement
to ounces or grams only. Cups is not available with this method. For best results, level the
food inside the pot for even cooking.
6.
Select grain preparation, liquid type, and grain texture on the screen.
OPTIONAL: If desired, select DELAYED COOK. This can be set for up to 24 hours.
7.
If too little food is added, the letters will flash red and the message "Please add more food
to the pot" will appear. Once completed, the scale screen will appear.
8.
Close the Lid and tap the START option.
9.
Once the liquid dispenses, the screen will show an estimated cook time and the
KEEP WARM option. This option can be turned off if desired.
10.
When cooking is about to complete, a countdown timer will appear and audibly notify you
when cooking has been completed. When finished, the Grain and Rice Cooker will
automatically switch to KEEP WARM mode for 6 hours.
IMPORTANT: The Ceramic Pot will be hot. To remove, use pot holders.
PRESET LENTILS AND BEANS CYCLE
1.
Fill the Water Tank to the Max (maximum) fill line with the desired liquid.
2.
Turn the Power Switch to the ON (I) position, located on the left side of the appliance.
3.
Select the Bean type by tapping the selection on the screen.
4.
Add the desired beans or lentils to the Ceramic Pot. The Grain and Rice Cooker will
automatically sense the weight of the food when pouring it into the Ceramic Pot.
NOTE: Liquid should not be added at this step as it will alter weight scale performance.
The Water Tank should be filled prior as per step 1, or alternative liquid can be added after
step 6.
TIP: While on the weight screen, the units of measure (cups/oz/g) can be changed on the
screen by tapping the 3 dots on the right.
5.
If the food has already been added, remove the Ceramic Pot for 3 seconds and reinsert
pot in the cooker.
NOTE: Adding food without selecting the cook mode first will limit the unit of measurement
to ounces or grams only. Cups is not available with this method. For best results, level the
food inside the pot for even cooking.
6.
Select bean preparation, liquid type, and bean texture on the screen.
OPTIONAL: If desired, select DELAYED COOK. This can be set for up to 24 hours.
7. If too little food is added, the letters will flash red and the message "Please add more food
to the pot" will appear. Once completed, the scale screen will appear.
8.
Close the Lid and tap the START option.
9.
Once the liquid dispenses, the screen will show an estimated cook time and the
KEEP WARM option. This option can be turned off if desired.
10.
When cooking is about to complete, a countdown timer will appear and audibly notify you
when cooking has been completed. When finished, the Grain and Rice Cooker will
automatically switch to KEEP WARM mode for 6 hours.
NOTE: Beans and lentils will have cooking water remaining in pot. Drain pot before
serving food.
IMPORTANT: The Ceramic Pot will be hot. To remove, use pot holders.
CUSTOM CYCLE SETTING
Custom cycle settings are cooking features that allow flexibility for cooking all types rice, or
beans to create and save new cooking algorithms.
1.
Turn the Power Switch to the ON (I) position, located on the left side of the appliance.
8