Black & Decker PROFESSIONAL WorkMate 2000 Operating Instructions Manual page 5

VICE JAWS AND CENTRE BOARD OPERATION
By loosening
the two tommy bar handles
the centreboard can be removed
converting
the
WM2000
into a large
capacity vice.
Each tommy bar works
independently
so that the front vice jaw
can be adjusted
into a tapered position
when required
(fig.
4). The rear vice jaw is
adjusted by a
snap lock mechanism
(pressure upwards releases the jaw, and
downwards
pressure locks the jaw) and
can be
repositioned into a series of
parallel
holes (fig.
4).
The centre board can be used between
the two bottom crossframe members
when greater capacity is required fig. 4 &
fig. 7.
VICE JAW AND WORKBENCH COMBINED
Fig. 5
Slide the centre board base supports (B)
into the rear holes of the
appropriate
parallel frame.
positioned
a slight
gap remains between the rear
vice jaw
and the centre board (A) (fig. 5).