Step6: Insertinga disc or a "Memory Stick PRO
Duo"
Wheel you select [INT. MEMORY] in
"Step 5." this "Step 6" operation is
unnecessary (DCR-DVD810).
Wheel you select [DISC] in "Step 52' a new
8 cm DVD-RW. DVD+RW. DVD-R. or
DVD+R DL is required (p. 13).
0 Set the disc with the recording
side facing your camcorder, then
press the center of the disc until it
clicks.
0
Notes
• Remove dust or lingerprints
irom the disc
belorehand,
using a sole cloth (p. 118).
4
/
Check that the power of your
camcorder is on.
2
Slide the disc cover OPEN switch
in the direction of the arrow
(OPEN ===_).
[PREPARING TO OPEN] appears on
the screen. The disc cover slightly opens
automatically.
ACCESS
lamp (Disc)
Disc cover
OPEN
switch
Pickup lens
When Ihe disc cover opens slighlly, open it
lkulher.
Set the disc with the label side l_tcing out when
using a single-skied
disc,
4
Close the disc cover.
[DISC ACCESS] appears on the screen.
It may take some time for the camcorder
to recognize the disc.
• DVD-RW/DVD+RW
A screen appears to ask whether Sou
•,'ill use [DISC SELECT GUIDE].
Using ]DISC SELECT GUIDE] lets you
format the disc by following the
guidance on the screen. If you do not
want to use it, proceed to step 5.
• DVD-R/DVD+R
DL
You c:m start recording immediately
after [DIS(! ACCESS] disappears from
the screen. You do not need to proceed
to steps afler step 5.
3O