Manually Programming Timer Recordings - Panasonic DMR-T3040 Operating Instructions Manual

-
Manually programming timer recordings
You can enter up to 32 programs up to a month in advance. Each
daily or weekly program is counted as one program.
1 Press IPROG/CHECK].
A line that is ready
for programming is
highlighted.
2 Press [ENTER].
The timer recording setting screen appears.
3 Press [>] to move through the items
and change the items with [A, V].
e The current settings are shown each time you press [P].
€ You may use the numbered buttons to enter the CHANNEL,
DATE, ON (Start Time), and OFF (Finish Time).
M ONES
ECORDING 14 Zne
ets: POS TELA DEL ays
PS či E
* CHANNEL (Channel number and caption)
eDATE
Current date--- — the day before one month later —
SUN-SAT — MON-SAT 5 MON-FRI—
WEEKLY SUN---— WEEKLY SAT (— Return to Current date)
* ON (Start timeyOFF (Finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
* MODE (Recording mode page 19)
SP—XP-FR—EP-5LP (—Return to SP)
*DRIVE
HDD «—— DVD
eRENEW :
(Only when you set daily or weekly recording onto HDD
-»page 36, Auto Renewal Recording)
ON — OFF
Enter Title
Select "Enter Title" using [4, >] and press [ENTER] (>
page 45).
4 Press [ENTER] when you have fin-
ished programming the timer.
The timer recording list reappears.
PM: 200 PM SP WS Feats
[$t $4 ABC 38 TUE 230 PN 210098. SP e reti] Displayed if the
i mmemmm 0 S i ii
puc qo e
the remaining
———— space on the disc.
ePress [À, V] to select "New Timer Program" and repeat
steps 2- 4 to program other recordings.
D Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode ("I appears on the unit display).
The unit is not off. To save power, turn the unit off by pressing
[, DVD POWER].
Notes on timer programming
` To cancel the unit from recording standby
Cancel all the timer recording programs using [CANCEL]
(2 page 37).
To stop recording when recording has already begun
While the recording drive is selected
Press [E then [ENTER] within 5 seconds.
(Recording stops.)
^
eThe remaining time displayed is based on the current recording
mode. f
e Scheduled timer recordings will be activated even if playback
or other recording is already taking place.
e When recording more than one program in a row, for HDD and
DVD-RAM the first few seconds, and for DVD-R about the first
30 seconds of all programs from the second one onwards will
not be recorded.
eTimer recording will not be activated if editing or dubbing is
being carried out.
elf you set DST (Daylight Saving Time) to ON when manually
setting the clock (page 13), timer recording may not work
when summer switches to winter and vice versa.
e When timer recording starts, the record lamp (page 7, Main
unit) lights, even if the unit is off.
Relief Recording
When the recording drive is set to "DVD" for timer recording, the
unit will automatically evaluate if the program will fit onto the disc
before beginning recording. If the program will not fit then the
recording drive will be altered to "HDD" automatically.
e |f the time remaining on the HDD is insufficient, as much of the
program as possible will be recorded onto the HDD.
eif there is no disc in the tray or the disc cannot be recorded on,
the recording drive will be altered to HDD.
e The recording mode will not be altered.
eThe Direct Navigator shows which programs were relief-
recorded ("page 26).
Timer recor "SH
35
RQT6637