59 _ Selecting The Print Settings - Canon DC410 Instruction Manual

2
Turn on the printer.
3 Connect the camcorder to the
printer using the suppled USB
cable.
• Connection F]. Refer to
Connection Diagrams ([i3 64).
• _ appears and changes to f'{.
I£1?OITAIT
If _ continues to flash (for more than
1 minute) or if f'{ does not appear, the
camcorder is not correctly connected to
the printer. In such case, disconnect the
USB cable and turn off the camcorder
and the printer. After a short while, turn
them on again, set the camcorder to
mode and restore the
connection.
If the printer is connected to the
camcorder while al stil images or all
print orders are being erased, the printer
wil not be recognized correctly.
_ IOTES
" ! will appear for images that cannot be
printed.
We recommend powering the camcorder
using the compact power adapter.
Refer also to the printer's instruction
manual.
• Connection to a PictBridge-compatible
printer wil not work when the memory
card contains 1,800 stil images or more.
For best performance, we recommend
keeping the number of still images on the
memory card under 100.
II I
:_!iiii_;i !i!i¸i¸i::i¸¸¸ i_i_ii!i!ii_i!!i _ .... i) i
Selectingthe Print Settings
You can select the number of copies
and other settings for printing. The
setting options vary depending on your
printer model.
i!i il _ ({Z]21)
Options
[ @ PAPER SIZE]: A vailablepapersizesvary
depending onthe printermodel.
[ _g PAPER T YPE]: S elect[PHOTO], [FAST
PHOTO], [PLAIN] o r [DEFAULT].
[_ PAGE LAYOUT]: Select[DEFAULT],
[BORDERED] or oneof thefollowingavailable
pagelayouts.
[BORDERLESS]: Thestill imageis enlargedand
may beslightlycroppedat theedgesto fit the
paper.
[2-UP],[4-UP],[8-UP],[9-UP],[16-UP]:Refer t o
thesidebaronpage60.
Select [ON], [OFF] or [DEFAULT].
Available 0nly with printers compatible with the
Image Optimize function. Select [ON], [OFF] or
[DEFAULT].
Canon PIXMA/SELPI-IYDS printers: You can
also select [VIVID], [NR] and [VlVlD+NR].
Select 1-99 copies.
Photos• 59