Replacing The Stylus - Sony PS-Q7 Operating Instructions Manual

Stereo turntable system
Table of Contents

Advertisement

TO BEGIN
RECORD
PLAY
AT A PARTICULAR
POINT—— Manual play
2
Close the dust cover.
Bring the tonearm to the point over the record
at which you want play to begin.
Be sure that the SPEED/SIZE selector is
set correctly.
Press the START/STOP button.
The tonearm will lower onto the record, and
play will begin.
When
the
tonearm
reaches
the
end
of
the
record,
it will
Note
automatically return to the arm rest and the turntable will stop.
lf you lower the tonearm too near the record label, the auto return
mechanism
may not activate at the end of the groove. Press the
START/STOP button to return the tonearm to the arm rest.
10 SFOP BERING PEAY
REPLACING THE STYLUS
Press the START/STOP
button. The tonearm
will return to the arm
rest and the turntable stops rotating.
To start the play again, press the START/STOP button after the — The stylus will lose its effectiveness and begin to damage records
tonearm has returned to the arm rest.
after about 400 hours of use.
For replacement stylus, use the Sony ND-143G.
Handle the stylus carefully as it is very delicate.
AFTER PLAYING
Detach the stylus assembly as illustrated and install the replace-
Position the arm lock fatch as illustrated.
ment stylus.
LOCK

Advertisement

Table of Contents
loading

Table of Contents