Table of Contents
Advertisement
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the trouble¬
shooting list below to see if you can self-diagnose the problem.
(VGA Mode)
Problems
Current Status
Remedy
LED ON
Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF
Check the power switch.
No Picture
Check if AC power cord is properly
connected to the monitor.
LED displays
amber color
Check if video signal cable is properly
connected at the back of monitor.
Check if the power of computer system is
ON.
Unstable
Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Abnormal
Display is
missing, center
shift, or too
■
Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
large in display
Using OSD, in case of missing full-screen
image, please select other resolution or
other vertical refresh timing.
Wait for a few seconds after adjusting the
size of the image before changing or
disconnecting the signal cable or powering
OFF the monitor.
Abnormal
(Only Audio-
Input model)
(Optional)
No sound, or
sound level is
Check the audio cable with the host PC is
connected.
Check if the volume setup of the host PC is
in minimum position and try to raise the
volume level.
EN-19
Advertisement
Table of Contents
