Technical Data; Accessories - Husqvarna PA310 Operator's Manual

Turn the adjustment screw for the oil pump.
Use a screwdriver or combination wrench.
• Turn the adjuster screw clockwise to
increase the oil flow.
• Turn the adjuster screw anticlockwise to
decrease the oil flow.
To do a check if lubrication does not work
1. Check that the oil channel in the bar is not
obstructed. Clean if necessary.
Lubrication system
Oil tank capacity, US pint/l
Weight
Weight, lb/kg
Guidebar and saw chain
combinations
The following combinations are approved.
Guide bar
Length, in./cm
2106 - 001 - 07.08.2023
2. Check that the oil channel in the gear
housing is clean. Clean if necessary.
3. Check that the bar tip sprocket turns
freely. If the chain lubrication system is still
not working after carrying out the above
checks you should contact your service
workshop.

Technical data

Accessories

Pitch, in./mm
PA310
0.32/0.15
4.0/1.8
Saw chain
17