Getting Started
PLAPArAtlONns ...:...sscseccsnssssrcossesssessesnseosseascnssseseoaseasossscessosecoees 3
Using Your Stereo
ad qsvers
10] telat
Before operating the system, read the following precautions
carefully
¢ Operate the unit only on 120 V AC, 60 Hz.
© Unplug the system from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord, pull
it out by grasping the plug. Never pull the cord itself.
¢ Should any solid object or liquid fall into the unit, unplug the
unit and have it checked by qualified personnel before any
further operation.
As the laser beam used in this unit is harmful to the eyes,
do not attempt to disassemble the cabinet. Refer servicing
to qualified personnel only.
¢ AC power cord must be changed only at the qualified
service shop.
If you have any questions or problems concerning your
system, please consult your nearest Sony dealer.
For detailed precautions, see the leaflet "IMPORTANT
SAFEGUARDS".
Preparations
You can control the system (except the cassette deck) with
the supplied remote commander.
nic) paleccm Ore) aatearclatelsa
Insert two size AA (R6) batteries with the correct polarity.
1 Slide the cover in the direction of the arrow to
remove it.
2 insert two size AA (R6) batteries correctly so that
the + and - polarities match the polarity diagrams
inside the battery compartment.
Battery life
About half a year of normal operation can be expected when
using Sony SUM-3 (NS) batteries.
When the batteries are exhausted, the commander can no
longer operate the unit. Replace both batteries with new
ones.
To avoid battery leakage
When the commander is not to be used for a long period of
time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
To avoid malfunction of the remote commander
Avoid keeping the commander in extremely hot or humid
locations.