Guarantee Restrictions - Philips AT940 User Manual

English
20
1 Disconnect the shaver from the mains or
remove it from the charging stand (AT940
only).
2 Let the shaver run until it stops.
3 Undo the screws in the back of the shaver and
in the hair chamber.
4 Remove the front panel and the back panel.
5 Bend the 6 hooks aside and take out the
power unit.
Be careful, the hooks are sharp.
6 Remove the battery.
Be careful, the battery strips are sharp.
Do not connect the shaver to the mains again
or put it back into the plugged-in charging
stand (AT940 only) after you have removed the
rechargeable battery.
guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre toll free at 1-866-800-9311.

guarantee restrictions

The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.