3-3. Setting for ISDN
Switch Type
The USB ISDN TA supports "Normal Switch", "DDI point to point switch" and
"DDI point to multipoint switch". You can use the default setting, "Normal
Switch", as your switch type. If your local switch provider has already
informed you that your switch type is DDI ( Direct Dial In), you shall select the
DDI switch type for using the USB ISDN TA.
Analog Coding
This is for analog coding method. It is A-law in Europe, u-law for USA and
Taiwan. For other area, please make sure what analog coding method is
being adopted by your local Telecom. Otherwise, there will have problems for
Fax, V.23 and V.22 connection.