Table of Contents
Advertisement
White shading adjustment
White shading adjustment
White shading adjustment is recommended after replacing the lens.
The adjustment relates to the camera vertical coloration. If the lens includes an extender, the shading
can be optimized for both extender on and off modes.
(Vertical coloration refers to an effect whereby the image of an overall white sheet of paper tends
toward green at the top and magenta at the bottom, or vice versa.)
Adjustment
1. Install the lens on the camera.
Be sure to connect the lens cable.
2. Set the electronic shutter to off and the gain to L (0 dB).
3. Set the lens extender to off.
4. When notice flicker on the monitor which occurred by fluorescent or mercury lighting,
use sunlight or halogen as the light source.
Using auto iris mode for the lens iris, the iris stop should be between F4 and F11. If necessary,
adjust the light source level and keep iris stop position in it (be sure the electronic shutter is off).
SHUTTER OFF
LENS EXTENDER OFF
14
GAIN L (0dB)
Advertisement
Table of Contents
