Advertisement
POWER AND VOLUME
1 Hold the Power switch for approximately 1 second to switch
the transceiver power ON.
•
A beep sounds and the LED indicator blinks blue a number of
times as described in the "BATTERY LEVEL GUIDE" table on
page 11.
•
To turn the power OFF, hold the Power switch for 2 seconds.
2 In Volume Adjustment mode, press the Up/Down keys to
adjust the volume.
•
Press the key programmed as [Squelch Off] to hear
background noise.
•
Press the PF-2 key to switch between Volume Adjustment
mode and Channel Select mode.
TRANSMITTING AND RECEIVING
1 In Channel Select mode, press the Up/Down keys to select
your desired channel.
•
There are two cases to indicate the channel number. They are
Voice Announcement enable case and Voice Announcement
disable case. Channel number indications are described in the
table below.
Ch. No. : Channel Number
Vo. Ann. : Voice Announcement
LED Bl. : Number of times LED blinks
T. So. : Number of times Tone sounds
Ch. No.
LED
1
2
Yellow
3
4
BASIC OPERATIONS
Voice Announcement
Enable
Vo. Ann.
LED Bl.
"One"
"Two"
"Three"
"Four"
LED Bl. and T. So.
1
2
3
4
Disable
1
2
3
4
9
Advertisement
