Changing The Frequency Of Remote Control Signal - Hitachi CP-A200J User Manual

Changing the frequency of remote control signal

The accessory remote control has the two choices on signal
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote
control does not function properly, attempt to change the
signal frequency.
In order to set the Mode, please keep pressing the
combination of two buttons listed below simultaneously for
about 3 seconds.
(1) Set to Mode 1:NORMAL... VOLUME- and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE
item of the OPTION menu (
should be set to the same mode as the remote control.
49) of the projector to be controlled
Remote control
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE VOLUME
ON
OFF
(2) (1)
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
15