To Remove Stand Base - Vizio VX37L User Manual

Preparing Your LCD Preparing Your Preparing Your Preparing Your
The VIZIO VX37L can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the VX37L on the wall, please follow the instructions below for removing the stand base.
To remove the stand base To remove the stand base
To remove the stand base To remove the stand base
1. Unplug all of the cables and cords from your
VX37L HDTV20A.
2. Place the VX37L HDTV20A face down on a
soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3. Remove the eight (8) screws (specs: M4,
15mm long, self threaded) holding the base
to the VX37L HDTV20A.
4. Carefully remove the stand base.
5. After the stand base is removed, the brackets or plate; supplied with the wall mounting hardware,
must be screwed in place by using the four
mounting holes patterned at 510mm apart
horizontally and 200mm apart vertically.
6. Use four (4) bolts or screws (Specs: M8,
25mm long, 1.25 pitch); usually supplied by
the wall mount manufacturer to do the
attachment of the mounting brackets or plate.
To find the perfect mount for the VIZIO VX37L HDTV20A, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 11/19/2007
LCD HD LCD LCD HDTV for Wall Mounting HD HD TV for Wall Mounting TV for Wall Mounting TV for Wall Mounting
6
www.VIZIO.com
VIZIO VX37L HDTV20A User Manual