Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VX20L User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power 'VIZIO' light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.

1.2 Side Panel Controls

POWER ( ) – Switch the VX20L HDTV20A on by
pressing the button once. Press the button again to the
VX20L HDTV20A off.
MENU – This button activates the On Screen Display
(OSD). If a sub-menu is active, pressing this button will
return to the previous menu level.
CH + / - – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function
as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease to
the speaker volume.
buttons function as left and right
controls in the OSD menus.
INPUT (ENTER)
–
pressing of this buttons steps
through the input sources in the
following sequence: TV, AV/S-
Video, Component,
HDMI. Once you have stepped
through the entire sequence, you
will return to the beginning.
Additionally, when the OSD is
active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this
button will display the current input mode.
Version 11/28/2007
While the OSD is active, these
Repeated
RGB, and
www.VIZIO.com
VIZIO VX20L HDTV20A User Manual
9