Table of Contents
Advertisement
TROUBLESHOOTING
Symptom |
'Cause
t—ia
e Input
signals are not strong enough,
» Separate the antenna from the unit by
No auto stop.
|
some distance,
oreee
Weeeeentoveanee
ns
in emir eet
|e TV antenna is not connected to VCR, or | ® Connect the TV antenna to the VCR.
connections are faulty.
TV source cannot
be seen
when the VCR's TV tuner is
sult the operating instructions of your
|
:
:
|
tion ceases to operate. For details, con-
|
|
i
VCR.
j
work.
.
Peet
ie
@ Poor angie or too great a distance from | e Use within 7 meters
and within
a 30
the remote sensor window.
degree angle of the remote sensor win-
® There is an obstacle between you and | @ Change your position or move the obsta-
the remote sensor window.
cle.
!
dow.
|
l
Abnormal functioning of this unit may be caused by static
electricity, or other external interference. To restore normal
operation, turn the power off and then on again, or unplug the
AC power cord and then plug it in again.
MAINTENANCE
OF EXTERNAL SURFACES
e
Use a polishing cloth or dry cloth to wipe off dust |
and dirt.
|
@
When the surfaces are very dirty, wipe with a soft
cloth dipped in some neutral cleanser diluted five or
six times with water, and wrung out well, and then
wipe again with a dry cloth. Do not use furniture
wax or cleaners.
Never use thinners, benzine, insecticide sprays or
other chemicals on or near this unit, since these will
corrode the surtaces.
22
<ARB7066>
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
