Table of Contents
Advertisement
Available languages
Available languages
ZZ o -— FE Ap Si mm
Monitor Care
O
Before cleaning stains from the surface of the CRT, make sure to turn off the power, and use a
soft cloth to wipe away any stains. Because the surface of the CRT is easily scratched, avoid
rubbing the surface with anything other than a soft cloth.
O
Stains from the cabinet should be wiped off using a cloth which has been soaked in a neutral de-
tergent. Before wiping, the cloth should be squeezed to remove excess moisture.
Specifications
[m
TX-1703MA Series
TX-2013MA Series
TX-2103MA Series
Power supply
Input voltage:
AC 90-264 V
Frequency:
50 / 60 Hz
Power consumption:
150 W max.
Input signal.
Video signaling system:
Signal level:
RGB analog
0.714 Vp-p (no synchronizing signal)/1.0 Vp-p (with synchronizing signal)
(Based upon RS-343A)
100 MHz Typ.
Separate, composite and sync on green system
(automatic selection)
TTL leve1/0.286 Vp-p
Frequency:
Synchronized signaling
system:
Signal level:
Horizontal timing
Allovable Frequency range:
30.0-64.0 kHz
Blanking time:
4.0 us min.
Back porch time:
1.25 us min.
Front porch time:
Length of back porch time or less
Sync width time:
1.2ps min.
Vertical timing
AllowabieFrequency range:
Blanking time:
Back porch time:
Sync width time:
50.0-90.0 Hz
0.6 ms min.
0.5 ms min.
0.045 ms min.
Connector
`
Power supply:
signal:
CEE 22 type three pin connector
BNC connector X 5/15 pin mini D-sub connector (female pins)
(switch select)
CRT
Size:
Dot pitch:
Phosphor:
Surface treatment:
"ege
Tone
| ams
[ emm
|
oom
RGB short persistence
silica coat ESF (Electro-Static Field) treatment
Service environment
Temperature:
Humidity:
Outside dimensions:(W-H-D)
Weight:
413 X 434 X 480 (mm) | 484 X 478 X 536 (mm) | 510 X 492 x 567 (mm)
All specifications are subject to change without notice.
Advertisement
Table of Contents
