Replacement Of Main Parts; Replacement Of Front Unit - Sony DXC-325P Service Manual

2-3. REPLACEMENT OF MAIN PARTS
2-3-1. Replacement of Front Unit
Note: When the CCD block is to be replaced,
replace the front unit which contains
the CCD block.
l. Turn the mount lever counterclockwise and
remove the lens. Release the VF harness
from the harness clamp. Pull the viewfind-
er in the direction of arrow, pulling the
stopper of viewfinder. The viewfinder will
be removed.
Stopper Viewfinder
Harness
Clamp
2. Remove the right and left side panels,
referring to Section 2-2 "REMOVAL OF CABI-
NET",
DXC-325 (UC)
DXC-325P (EK)
2-3
3. Disconnect the eight connectors CN5, CN7,
CN8, CN14, CN15, CN16, CNI9 and CN21 on the
MB-190 board. Release the harness from the
harness clamp.
4. Remove the two screws shown in the figure
and open the AT-53 board.
connector CN4.
Disconnect the
ATUTEUC EEN
2? SFRV INFO