Bosch Professional GAS 18V-12 MC Original Instructions Manual page 21

Symbols and their meaning
ate the dust extractor unless the com-
plete filter system is correctly inser-
ted. Otherwise, you are putting your
health at risk.
0
1
Auto-Start function
Extraction of the accruing dust from op-
erational power tools that are connected
via an Auto-Start Remote GCT ...;
the dust extractor switches on automatic-
ally and then switches off again after a
time delay.
Switching Off
0
Extraction
1
Extracting dust deposits
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The dust extractor is intended for collecting, vacuuming,
conveying and separating wood chips as well as non-flam-
mable dry dusts, non-flammable liquids and water-air mix-
tures. The dust extraction capability of the dust extractor
has been tested and corresponds to dust class M. It is suit-
able for the increased demands in professional use, e.g. in
trade, industry and workshops.
Dust extractors from dust class M in accordance with IEC/
EN 60335-2-69 may only be used to vacuum and extract
harmful dust with an exposure limit of ≥ 0.1 mg/m
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.
Product Features
The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Air flow alarm indicator (user interface)
(2) Statusbar (user interface)
(3) Rechargeable battery charge indicator (user inter-
face)
(4) Auto-Start function indicator (user interface)
(5) Button pairing (user interface)
(6) User interface
(7) Holder for accessories
(8) Locking mechanism for accessories bracket
(9) Pull strap
Bosch Power Tools
(10) Hose adapter
(11) Sealing plug for extraction connection
(12) Container
(13) Catch for top part of dust extractor
(14) On/off switch
(15) Top part of dust extractor
(16) Carrying handle
(17) Fastening eyes
(18) Battery compartment cover
(19) Battery compartment cover release button
(20) Vacuum hose
(21) Dust extraction adapter
(22) Curved nozzle
(23) SDS Clean adapter for drilling
(24) Brush
(25) Crevice nozzle, short
(26) Crevice nozzle, long
(27) Floor nozzle, narrow
(28) Floor nozzle, wide
(29) Suction tube
(30) Battery bay
(31) Rechargeable battery
(32) Main filter
(33) Bag holder
(34) Float cage
(35) Filter holder
(36) Plastic bag
(37) Snap fastener
(38) Carrying strap
(39) Auto-Start remote GCT ...
(40) Status indicator of Auto-Start Remote
3
.
(41) Start/stop button for Auto-Start Remote
(42) False air intake of the dust extraction adapter
(43) Detents for bag holder
(44) Float
(45) Castor
(46) Castor adapter
(47) Hose connector
(48) Sealing sleeve at hose end on dust extractor side
(49) Locking ring
(50) Sealing sleeve at hose end of power tool/nozzle
(51) Spring for electrostatic discharge
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 21
a)
a)
a)
a)
a)
a)
a)
a)
a)
1 609 92A 5N0 | (26.09.2023)