Panasonic KX-G8300 Service Manual And Technical Manual page 19

KX-G8300
4. External alarm speaker (4 to 8 ohm) can be connected to the main unit.
Connect the cord from the external alarm speaker to the EXT SP jack at the rear of the main unit.
External Alarm
Speaker 4~80.
40, — Rated at more than 0.8 watts
80 — Rated at more than 0.4 watts
Fig. 23 WY
5. Loran Receiver (NMEA 0183 interface format only) can be connected to the main unit.
Connect the cable from the Loran receiver to the NAV jack at the rear of the main unit.
Opened
@); Loran © Cold Rubber Cap
@ @ @; Loran @ Hot
eho) @) @; (No connection)
@), (No connection)
Open the rubber cap backward and
secure the nut to fix the connector to
the main unit. Close the rubber cap
around the nut after connecting the
cable. When removing the connector,
pull the rubber cap slightly backward
to allow space between the cap and
the main unit, then open the cap
backward to loosen the nut.
Main Unit
'
NAV
Loran Receiver
(only NMEA0183
INTERFACE FORMAT)
WA
Fig. 24
ar
on