Grizzly T33899 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T33899 30" Powertool Charging
Station features all-metal construction, a hanging
rack for storing (6) power tools, a pre-installed
power strip with (4) NEMA 5-15 outlets, and (2)
USB ports conveniently located for easy access.
Specifications
Weight .......................................................28 lbs.
Dimensions (W x D x H) ..............30 x 10 x 26 in.
Shelf Weight Capacity ...............................30 lbs.
Total Weight Capacity..............................125 lbs.
Power Cord Length .................................... 55 in.
Included Plug Type ....................................... 5-15
Max. Amperage Load .................................... 12A
Max. Voltage................................................ 125V
Frequency ...................................................60 Hz
Max. Wattage ........................................... 1500W
USB Output .............................. 5VDC, Max. 2.1A
Inventory
Description
A. Charging Station w/Power Strip ................. 1
B. Wood Screws #8 x 2
C. Lag Screws ⁄ " x 2
1
4
D. Drywall Anchors #8 x 2" ............................. 6
E. Flat Washers ⁄ " ....................................... 12
1
4
Mounting Bracket ....................................... 1
F.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ " ............................ 6
5
16
⁄ " ................................. 6
1
2
COPYRIGHT © MAY, 2023 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 07/23) #KS22737 PRINTED IN CHINA
***Keep for Future Reference***
MODEL T33899
30" POWER TOOL
CHARGING STATION
F
Figure 1. Model T33899 inventory.
Qty
Needed for Setup
The following items are needed, but not included,
for the installation of the Model T33899.
Description
• Ruler 24" ..................................................... 1
• Power Drill .................................................. 1
• Drill Bits
• Phillips Head Screwdriver #2 ..................... 1
• Wrench or Socket 10mm ............................ 1
• Stud Finder ................................................. 1
• Level ........................................................... 1
• Pencil or Marker ......................................... 1
INSTRUCTIONS
To reduce your risk of
serious injury, read this
entire manual
using machine.
A
E
⁄ ", ⁄ " ....................................1 Ea.
1 1
8 4
BEFORE
B
C
D
Qty
V1.05.23