Whirlpool 4GWED5500 Use And Care Manual page 8

4.
Select the desired cycle
Select the desired cycle for your load. See "Cycle Guide"
or the display for more information about each cycle.
5.
Set cycle temperature
The default cycle settings will be shown. For some cycles,
you may select alternate settings by pressing the button for
that setting. Time adjusts for Timed Dry Cycles only.
8
6.
Select cycle options (if desired)
Select additional options by pressing the button.
NOTE: Not all options and settings are available with all
cycles.
Wrinkle Shield feature
Get 90 minutes of heat-free, periodic tumbling at the end
n
of a cycle. Press the Wrinkle Shield button to turn on or off
at any time before the cycle has ended.
The Wrinkle Shield feature is preset to "OFF." If selected
n
for other cycles, the Wrinkle Shield feature setting will
remain "ON" the next time that cycle is selected.
Cycle Signal
The Cycle Signal produces an audible sound when the
n
drying cycle is finished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Press CYCLE SIGNAL to turn on.
n
7.
Press START/PAUSE to begin cycle
Press the START/PAUSE button to begin the cycle.
8.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Shield feature to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.